搜索资源列表
chuankou
- 基于ART采集卡和嵌入式ARM主板用EVC实现数据的实时采集及串口接收和发送。可以通过串口调试助手观察串口的通讯状态。-ART-based capture cards and embedded ARM board with the EVC to achieve real-time data acquisition and serial port receive and send. Can be observed through the serial port to debug serial co
431465_b5876716cac6a624
- 基于QQ2440 ARM开发板的实时绘制曲线图的QT程序，从ARM板上的串口接收数据后，绘制曲线图形，然后利用网口将数据传输到PC机上。-QQ2440 ARM development board based on real-time rendering curve of the QT program, from the ARM-board serial port to receive data, draw curve graph, then use the Ethernet port to tr
VBcommDebug
- 用VB开发的串口接收数据，可选择串口号，波特率，数据位-VB-serial receive data, selectable serial port number, baud rate, data bits
AVRmega8uartC
- AVRmega8,串口中断程序，把串口接收到的数据再发送给串口，其中是利用中断的形式。-AVRmega8, serial port interrupt program, the serial port receives the data and then sent to the serial port, which is the use of interrupted form.
UART
- 下位机串口接收程,可用于一般的单片机系统-It s a serials program
COMRecv
- 基于AT91RM9200的Linux串口接收测试程序-The Linux-based AT91RM9200 serial port acceptance testing procedures,
89c51FLASH
- 51单片级的FLASH操作掉电保存数据；此程序是GPS模拟串口接收，在1602上显示，并且可保存掉电前的数据，用串口调试助手可以模拟那个GPS协议（4800波特率）-FLASH 51 single-level power-down operation save the data this process is simulated serial GPS receiver, the 1602 show, and save the data before power-down, with seria
comm
- dos下的串口相关编程，主要是对程序交换机的串口接收和发送的汇编源码-dos serial port under the relevant programming, the program switches mainly receive and transmit serial compilation of source
OWRSPDLL
- VC编写的上位机与下位机之间的串口收发软件-VC and PC prepared between the lower level computer software serial transceiver
async_uart
- 用verilog写的串口接收发送通信程序，已经在cyclone EP1C12Q240C8调试通过-Serial receiver with verilog send written communication procedures, has been adopted in the cyclone EP1C12Q240C8 debugging
keilc51_manual
- 单片机与上位机PC的通信程序设计方法： ⑴串口初始化：波特率定为4800 ⑵串口接收数据：串口初始化后处于数据接收状态，当有数据到达串口时，串口将数据接收保存在寄存器中暂存 ⑶串口发送数据：等数据接收完成后，将寄存器中暂存的数据通过串口发送给该数据的来源地。-PC-MCU and host computer communication program design: ⑴ serial port initialization: the baud rate as 4800 ⑵ serial rece
FPGA_sata_receiver
- 基于EasyFPGA030的串口接收显示设计。-Serial receiver based EasyFPGA030 display design.
UART1602
- 51单片机用1602液晶显示串口接收到的数据-51 1602 MCU with LCD serial data received
WindowsFormsApplication2
- 串口通信，一个串口发送，发送内容通过textbox写入，另外一个串口接收，并且写入textbox中，并且检测到回车时停止接收-Serial communication, a serial port and send the content through the textbox to write, another serial port to receive and write in the textbox and when detected carriage stop receiving
fpga2
- 基于EasyFPGA030的波形发生器设计和串口接收显示设计。-The waveform generator based on EasyFPGA030 serial receiver design and display design.
threesend
- 串口接收和发送，并对WTV进行三线发码，是WTV芯片正常播放语音。-Serial port receive and transmit, and WTV issued a three-line code is WTV normal play voice chip.
rfid_vc
- /Initial COM m_ctrlComm.SetCommPort(1) //选择com1 m_ctrlComm.SetSettings("9600,n,8,1") //通信参数设置 波特率9600，无校验，8个数据位，1个停止位 m_ctrlComm.SetInBufferSize(1024) //指定接收缓冲区大小 m_ctrlComm.SetRThreshold(1) //参数1表示每当串口接收缓冲区中有多于或等于1个字符时将引发一个接收数据的OnComm事件
rec
- 用VerilogHDL编写的串口接收模块，可以综合。-VerilogHDL prepared with serial receiver module can be integrated.
serial
- 用VB实现界面登陆 串口接收与发送以及用excal文件来存储和显示接收到的数据 -Log serial port interface with the VB implementation of transmitters and receivers and use excal file to store and display data received
jieshou
- 串口接收单个字符程序，本人已测试通过。希望对大家有所帮助-Serial port to receive a single character program, I have been tested. Hope to help. . .