搜索资源列表
test
- 测温并与上位机通信，在电脑上显示当前温度-Temperature measurement and PC communication, display the current temperature on the computer
COM-test-temp
- 实现上位机实时显示，温度传感器采集温度,上位机可以显示温度变化曲线-Between PC real-time display, temperature sensors collect temperature, the PC can display temperature curve
tempture
- 通过DS18B20采集温度，然后直接通过虚拟串口传给上位机，在Labview中直接显示温度-Through DS18B20 collecting temperature, and then directly through the virtual serial port to the PC, directly show the temperature in Labview
Temperature
- 用QT经过串口通过读取单片机的温度数据实现上位机上的图行显示，qt显示温度表盘-By reading through the serial port using QT temperature data to achieve single-chip PC line on the chart display, qt shows the temperature dial
8051F33018B20UART
- 这是一个用8051F330编写的测温程序， 用18B20实现测量温度，并通过PC机的串口显示出来。硬件要求是开发板一块，测试温度的蕊片，串口和电脑。经实验，效果还可以。-This is a measurement used 8051F330 prepared procedures for measuring temperature using 18B20 achieve and, through PC-Serial displayed. Hardware requirement is a de
SmartHouse
- 用VC开发的一个智能家居上位机，主要显示来自传感器采集的温度，湿度，光照强度，并加入访问数据库，对历史数据通过图标显示，加入了web控件，只是简单实现访问带有IP的视频摄像头。-A smart home PC with VC development, the main display of temperature, humidity, light intensity collected from the sensors, and add access to the database, icon
practice_time
- 基于51的数字时钟带温度（DS18B20）测量，支持上位机以及键盘修改数据-Based digital clock with temperature 51 (DS18B20) measurements, as well as support the PC keyboard to modify the data
ADC-Collection-procedures
- 基于STC12C5A60S2 ADC采集程序，能够实时采集温度模拟信号，并转变为数字信号传给单片机，再通过串口传给PC上位机并显示出来-Based STC12C5A60S2 ADC acquisition program, collecting temperature in real time analog signals into digital signals and transmitted to the microcontroller, then the host computer via
STC89C52PDS18B20
- 基于51内核的单片机STC89C52的DS18B20温度采集，通过串口发至PC显示温度-51 core based microcontroller STC89C52 DS18B20 temperature acquisition, sent to the PC via the serial display temperature
RS232
- 会显示时时温度，当发送端温度变化时，接收端显示温度也变化，当超过预设范围蜂鸣器报同时打开PC温度采集界面可以看到界面温度效果-Always displays the temperature, temperature changes when the sending end, the receiver display temperature change, when more than a preset range buzzer newspaper open at the same tempera
RF1100
- <wendu-fasong>采集温度信息后发送 2． <wendu-jieshou>LCD与接收端底板对接，并且串口线和PC相连，当通信正常情况下， LCD会显示时时温度，当发送端温度变化时，接收端显示温度也变化，当超过预设范围蜂鸣器报警 同时打开PC温度采集界面可以看到界面温度效果，其中波特率选择9600，和串口号 -<wendu-fasong> After collecting temperature information trans
SUN
- 基于UC/OS-II的温度实时监测系统, 控制CPU自带温度传感器，并将温度显示在数码管或LCD上；当温度大于设定值时报警；报警驱动蜂鸣器并通过串口上传到PC；PC给出消除报警指令后则取消报警；报警的重新启动由按键通过中断送入；合理安排UC/OS-II实时任务，合理利用UC/OS-II各类事件机制（信号量、消息邮箱、消息队列、事件标志组等）。-Based on UC/OS-II real-time temperature monitoring system, the control CPU co
Form1wendu
- 该程序用于对采集的温度数值进行处理，在PC机上仿真，以温度计和曲线图的形式显示温度变化。-The procedure for processing the collected temperature values, the simulation on the PC in the form of a graph display thermometer and temperature changes.
src
- 自己用NI控件开发的六路温度测试上位机，串口通信，支持数据处理等-Own use NI control the development of six-channel temperature test PC, serial communication, data processing and other support
NRF_WD
- STM32实现简答的温度传感器采集的数据上传到PC机-stm is helped for study!
the-serial-port
- 可以显示负温度 数码管显示同时通过串口发送到电脑端显示 使用dofly配套的测温软件 晶振使用11.0592M-You can display a negative temperature digital display simultaneously sent to the PC via the serial port using dofly matching temperature display software using crystal 11.0592M
02-PCVB.NET-SerialPort
- Visual Studio串口通信与测控应用编程实践PC端采用VB.NET（SerialPort控件）实现温度测控-Visual Studio
temp
- NRF24L01设置为32帧数据收发 下位机接收到来自目标温度单片机发过来的温度信号之后， 进行判断接收到的温度信号有没有传递错误 若头三个字节分别为0x55，0xaa，0xcc，则说明信息传递没有错误 其中串口发送到PC上位机的数据格式为 8路无线温度实时监控系统.带proteus仿真。第0,1,2字节分别为0x55，0xaa，0xcc 作用为判断数据传送有没有出错，若PC 上位机接收到这三个字节有其中一个字节不相同，则归为数据传送出错，不进行处理-After N
CC2240_stars_net
- 本程序基于CC2240、ATmega16l组件了一个星型网络，其中2个子节点分别采集酒精浓度和温度数值，将数据传给主节点后，上传到PC机，PC机上可以以曲线形式实时看到数据-After the program is based on CC2240, ATmega16l components of a star network, in which two child nodes were collected alcohol concentration and temperature values,
WD-fa
- 温度监测控制的汇编代码,包含同PC机通信以及温度检测部分,调试通过-Temperature monitoring and control assembly code, including communications with the PC and the temperature detection part, through debugging