搜索资源列表
ADC_VoltageSample
- c8051f020芯片,基于此单片机的ADC0转换,没有错误,可使你短时间掌握正确的ADC0寄存器配置-C8051F020 chip, based on the MCU ADC0 conversion, no errors, you can make a short time to master the correct ADC0 configuration register!!!
EXP8-Temperature(ADC0)
- c8051F020 片内温度传感器 源程序-c8051F020-chip temperature sensor source
ADC
- C8051F020 ADC0转换例程,包括初始化,采集全过程。-C8051F020 ADC examples。
ADC
- 这个例子代码需要时间和平均2048模拟测量来自inputP1.1使用ADC0,然后打印结果为终端窗口通过通用异步收发机。-This example code takes and averages 2048 analog measurements from inputP1.1 using ADC0, then prints the results to a terminal window via the UART.
AccelrometerBasic
- 基于MMA7260加速度传感器的AVR程序-Example to demonstrate the use of accelerometer. The sensor is MMA7260 from Freescale semiconductor. The X axis is connected to ADC0 and Y axis is connected to ADC7
C8051F320Software
- (1) AD_TEST: 摘 要: 本文件是AD测试实验;测试前需要对管脚复用的电压基准进行设置,将JP10的2,3脚短接,1脚空出。AD输入端子(J10)可输入4路AD(ADC0--ADC3),另有1路可测量片内温度,5路采样值都通过串口发送出去,在串口调试助手上看观察其值。4路AD中ADC0可通过跳线器(JP5)“ADJ_VOL”(1,2脚短接)与板上电位器相连,通过手动调VR1可以观察到电压值的变化。-(1) AD_TEST: Abstract: This document is
uart0
- 实现ADC0采样芯片温度,通过LCD显示,并通过串口0(J13)发送到PC机,同时接收PC传回的一个字符并显示, 请使用串口调试工具调试!-ADC0 sampling chip temperature, LCD display, and display through the serial port (J13) is sent to the PC, while receiving the character of the PC returns Please use the seria
ADC0_TEMP
- 实现ADC0采样芯片温度,通过LCD显示,并通过串口0(J13)发送到PC机-Achieve ADC0 sampling chip temperature through the LCD display. And sent to a PC via the serial port (J13)
uart1
- 实现ADC0采样芯片温度,通过LCD显示,并通过串口1(J13)发送到PC机,请使用串口调试工具调试!-ADC0 sampling chip temperature, LCD display, and through the serial port (J13) is sent to a PC, use serial debugging tools to debug!
ADC0
- C8051F350单片机AD转换,在寄存器观察窗ADC0H、ADC0M、ADC0L显示转换结果 -C8051F350 microcontroller AD conversion, observed in the register window Data in ADC0H ADC0M ADC0L display conversion results
ADC_VoltageSample
- ADC_VoltageSample.rar,c8051f020 adc转换程序-sfr16 DP = 0x82 // data pointer sfr16 TMR3RL = 0x92 // Timer3 reload value sfr16 TMR3 = 0x94 // Timer3 counter sfr16 ADC0 = 0xbe
F02x_ADC0_ExternalInput01
- C8051f020 采集电压信号 adc0-C8051f020 collection voltage signal adc0
ADuC7060SampDemo
- aduc7060实现的一个主通道ADC0和辅助ADC1采集电压程序,串口直接发送!-a main channel aduc7060 achieve the ADC0 and the auxiliary ADC1 to collect voltage program, serial sent directly!
12bit_ADC0_SERVO_CONTROL
- c8051f020单片机ADC0信号采集与舵机控制程序-c8051f020 microcontroller ADC0 signal acquisition and the steering gear control program
adc
- Descr iption: An analog signal applied to analog input ADC0 is converted into a 10 bit digital value using the built-in Analog-to-digital Converter. The higher 8 bits of the converted value is output to PORTB.
F06x_SAR16data
- C8051F060 高速ADC程序.最高采样率可达1MHz,最高分辨率达16位,双通道,可通过DMA将采集的数据直接存到XRAM中。-Data Acquisition example for F06x Target: C8051F060TB Target Board Descr iption: This example illustrates the use of ADC1 and the DMA to acquire and store data. It is intended
ADC0
- MSPG2553单片机的ADC转换测试程式, 使用通道A1,Vcc为参考电压。软件触发-The ADC conversion MSPG2553 SCM test program, using the channel A1 Vcc as the reference voltage. Software trigger
C8051F120
- C8051F120,实现ADC0采样芯片温度,通过串口0发送到PC机,实时监控温度的变化-C8051F120, ADC0 sampling chip temperature to achieve, through the serial port 0 is sent to the PC, real-time monitoring of temperature change
C8051F120-ADC0
- C8051F120 ADC读取片内温度函数,运行成功。大家可以直接调用此函数,进行片内温度读取。-C8051F120 ADC reads the chip temperature function runs successfully. We can call this function directly for on-chip temperature reading.
F020_AD_Internal_Tempreture_4
- 利用测量F020内部AD测量内部温度,程序注释详细,可读性强。使用过采样技术,显示温度准确稳定。可以通过简单的更改应用于测量外部信号。-Measure the Internal tempreture of the C8051F020 by the internal ADC0 and display the tempreture by the COG12864.