搜索资源列表
gpio-test
- 1、将makefile中的 CROSS =/usr/local/arm/2.95.3/bin/arm-linux- CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include/linux CFLAGS+=-I/usr/local/arm/2.95.3/arm-linux/include 路径改为你宿主机上的。 2、#make，来编译驱动模块。 3、
wm9712_wm9715
- Wolfson9712和Wolfson9705的驱动，在2.6内核下的-the audio codec drivers of wm9712 & wm9705,under linux kernel 2.6
LinuxDeviceDriver-05
- Linux设备驱动开发详解-06 udev-udev is targeted at Linux kernels 2.6 and beyond to provide a userspace solution for a dynamic /dev directory, with persistent device naming. The previous /dev implementation, devfs, is now deprecated, and udev is seen as the
s3c2440_uda1341ts_2.6.18
- kernel 2.6.18.2下成功移植uda1341驱动程序到s3c2440平台上.-linux device driver for uda1341. kernel 2.6.18.2
The_Linux_Kernel_API
- linux 内核的api函数介绍，涉及网络、驱动、文件系统等等各个方面，是linux 内核编程不可多得的参考手册。-all kinds of linux kernel api that involve the network, drivers, file system, and so on all aspects of linux kernel is a rare reference manual programming.
5.Linux
- 本文主要描述了如何将linux2.6的内核裁减为嵌入式Linux系统的过程,并在S3C2410开发板上移植了嵌入式Linux 2.6.11.7 内核系统,并说明了如何进行LCD驱动程序模块化编程及如何将驱动程序静态加载到系统内核之中。 -This article describes how to linux2.6 reduced to the core of the process of embedded Linux systems, and transplant S3C2410 dev
mmc
- LINUX-2.6.19.2 平台下的MMC/sd卡的驱动，很适合分析SD卡驱动分析-LINUX-2.6.19.2 platform of the MMC/sd card driver, it is suitable for analysis of SD card-driven analysis
pcf8563
- 本驱动程序是基于linux内核2.6.20下的AT91SAM9260的实时时钟I2C设备驱动程序。-This driver is based on the AT91SAM9260 under linux kernel 2.6.20 Real Time Clock I2C device driver.
SIM5218_driver_linux2_6_16_134_rar
- simcom5218 3G模块 linux-2.6.16.13下的驱动-simcom5218 3G module linux-2.6.16.13 driving under the
cs89x0.c.tar
- 网卡cs8900在s3c2410，linux 2.6.30内核上的驱动程序移植，关键程序drives/net/interface.c。 已经手动修改过，经测试通过。-Card cs8900 in s3c2410, linux 2.6.30 kernel driver transplantation, critical processes drives/net/interface.c. Have been manually modified, by the test.
LinuxdevicedriverdevelopmentXiangjie
- 本书全面而详细地讲Linux设备驱动开发中涉及的理论毛主席多种设备驱动的框架,本书 是基于2.6内核进行讲解,将字符设备、块设备、TTY设备、IIC设备、LCD设备、Flash设备、网络 设备、音频设备、PCI设备等复杂设备驱动的框架作为核心内容。完全从工程实际出发，具有很台 盟的可操作性
online-0.0.0.1.tar
- 在Linux下驱动USB 摄像头一直不是容易的事情，尽管其内核中就集成了对0V511系列摄像头的支持，开源驱动spca5xx/gspca也提供了对大部分主流摄像头的支持， 但还是无法涵盖所有品牌的各种型号的摄像头，尤其是对于国内的中低端用户，很难找到直接可用的Linux下的驱动。-In the Linux driver under the USB camera has not been easy, although its core on the integrated camera on 0V5
my-2440-beep
- linux2.6.30内核在s3c2440上的设备驱动的例子，利用新的os API编写的驱动。-linux2.6.30 the kernel' s device drivers s3c2440 example of the use of new os API driver prepared.
S3c2440_OV9650
- 使用于S3C2440开发板上的OV9650摄像头的Linux驱动，Linux内核为2.6版本-Linux driver of camera ov9650 for arm s3c2440， Linux kernel version is 2.6
crypto
- linux linux-2.6.29下的加密驱动文件-linux-2.6.29\crypto
mtd-mods-q2-2.6.25
- linux下比较详细mtd flash驱动相关资料-mtd driver under linux a more detailed information
ARM2410cs8900
- 自己做的在ARM上的网口驱动， 经过测试完全通过-ARM linux for 2.6
18b20for2.6.32.tar
- ds18b20的linux驱动，用于2.6.32内核。-ds18b20 linux driver for the 2.6.32 kernel.
mycam
- Linux是2.6的内核，Qt/Embedded是2.3.7版本的，USB摄像头主控芯片是中星微301P。摄像头驱动是spca5xxx，使用Video For Linux采集到jpeg图片。-Linux 2.6 kernel, Qt/Embedded is the 2.3.7 version, USB host chip camera Vimicro 301P. Camera Driver is spca5xxx, collected using the Video For Linux jpeg
linux-driver-setup
- 怎样给内核版本为2.6.30.4添加驱动，本例为一个空的驱动，主要是修改Kconfig和Makefile文件，采用modules动态加载-How to add kernel version is 2.6.30.4 driver, in this case an empty drive, was modified Kconfig and Makefile, use dynamic loading of modules