搜索资源列表
LED_SysTick
- stm32利用定时器定时点亮LED，LED闪烁-STM32 using the timer to light up LED
duoji
- stm32使用定时器高精度驱动6路舵机，亲测好用，代码效率高，请发挥你的想象力，驱动机械手，小车，航模。- stm32 using a timer to six high-precision servo drive, please use your imagination to drive the robot, car, model aircraft.
spin_sram
- 基于keil5的stm32板的开发，此程序重点在于对旋转的编码的定时器设置，和处理旋转编码器的状态，非常实用。-Stm32 based development board keil5, the program focuses on the rotary encoder timer settings, and state processing rotary encoder, very practical.
pwm-controls-led
- 在STM32环境下通过定时器的PWM功能控制LED灯-In STM32 environment through the PWM timer function control LED lights
dwt_delay
- 用于STM32项目的特殊的DWT定时器接口代码，代替定时器实现精确定时功能，还可以实现周期测试功能，并且不占用内部资源。-DWT timer for special interface code STM32 project, instead of the timer for precise timing function, you can achieve cycle testing capabilities, and do not take up internal resources.
dingshiqizhongduan
- 基于STM32单片机的通用定时器中断调试函数，主要是掌握定时器终端的配置过程-General based on STM32 microcontroller timer interrupt debugging functions, mainly is to master terminal timer configuration process
output-based-on-SM32
- STM32输出固定的pwm，可以通过调节pwm波的频率及占空比的，用的主要是定时器的多通道。 -STM32 output fixed PWM, can regulate the frequency and duty cycle of the PWM wave, the main use of the multi channel timer.
CODE
- 本实验将实现如下功能： 1,通过STM32的USART2（PA2，PA3）连接ATK-HC05蓝牙模块,检测并显示蓝牙模块的状态. 2,通过KEY0按键可以开启/关闭定时向ATK-HC05蓝牙模块发送数据(ALIENTEK HC05 xx)测试蓝牙模块的数据发送. 3,可以通过WK_UP按键设置ATK-HC05蓝牙模块的主从工作模式. 4,可以通过LCD显示ATK-HC05蓝牙模块接收到的数据. 5,可以通过USMART对ATK-HC05蓝牙模块进行AT指令查询和设置.
01STM32mini-LED
- STM32 嵌入式开放，介绍通讯方面的I2C/SPI/UART、模数AD/DA、Timer/Interrupt/PWM/DMA/USB/Ethnet/I2S/Can/PulseCounter-STM32 embedded open, introduced the communications I2C/SPI/UART, analog AD/DA, Timer/Interrupt/PWM/DMA/USB/Ethnet/I2S/Can/PulseCounter
STM32mini-RCC
- STM32 嵌入式开放，介绍通讯方面的I2C/SPI/UART、模数AD/DA、Timer/Interrupt/PWM/DMA/USB/Ethnet/I2S/Can/PulseCounter-STM32 Embedded Open, describes the communication aspects of the IC/SPI/UART, modulus AD/DA, Timer/Interrupt/PWM/DMA/USB/Ethnet/IS/Can/PulseCounter
TIM1--PWM
- 基于STM32单片机，利用单片机定时器，实现PWM的输出-Based on STM32 microcontroller, using SCM timer for PWM output
MotorProtecterV2.0
- stm32检测三相正弦波交流电压，转换为AD值进行电压测试使用DMA+中断+TIMER+ADC进行计算-Stm32 detection of three-phase sine wave AC voltage, converted to AD value for voltage test using DMA+ interrupt+ TIMER+ ADC to calculate
DDS
- 基于STM32的信号发生器（定时器控制），频率 占空比 峰峰值可调，输出最大频率30k -STM32-based signal generator (timer control), the frequency duty cycle peak and peak adjustable, the maximum output frequency of 30k
28BYJ48PL298n
- 基于STM32的步进电机28BYJ48+L298n模块，根据2005年电赛控制题目《悬挂运动控制系统》调试，可实现点到点，但画圆未成功。 采用标准八拍驱动步进电机28BYJ48，速度可根据定时器触发更新中断时间修改，经测试，速度越慢，力矩越大。 注释较详细。-STM32 stepper motor based on the 28BYJ48+L298n module, according to the 2005 race to control the title of suspension mo
MODBUS_RTU
- STM32单片机上针对MODBUS RTU协议 防止串口接收丢包 数据帧后死机，用定时器完成丢包数据帧处理-STM32 microcontroller for MODBUS RTU protocol to prevent the serial port to receive packet loss, data frame after the crash, using the timer to complete packet loss data frame processing
实时时钟实验报告
- 实时闹钟.1、STM32的实时时钟（RTC）是一个独立的定时器！ 2、RTC模块和时钟配置系统（RCC_BDCR寄存器）是在后备区域，即在系统复位火从待机模式唤醒后RTC的设置和时间维持不变。 RTC这章中，对RTC相关的寄存器的操作特别重要，(RTC Alarm real-time clock timer; keyer; intervalometer; timing device clock; timepiece allocation; configure; collo
PWM
- stm32基于定时器对PWM频率进行修改，以此控制步进电机，做到步进电机速度可调，只做了加速减速没有做，原理相同，实测可用(STM32 based on the timer to modify the frequency of PWM, in order to control the stepper motor, so that stepper motor speed adjustable, only to do the acceleration deceleration, did not do
TIM+DAC+DMA输出任意波形
- 采用STM32单片机中的定时器和DAC输出任意波形，非常值得下载！(The use of STM32 microcontroller timer and DAC output arbitrary waveform, it is worth downloading!)
TimeBase
- 基本定时器使用，针对STM32通用定时器的使用(The basic timer is used for STM32 universal timers)
实验8：定时器
- stm32单片机的定时器程序及中断使用，单片机开发(Stm32 single-chip timer program and interrupt the use of single-chip development)