搜索资源列表
007
- qq2440开发版的开源Bootloader代码,包括u-boot-1.1.6,vivi。-qq2440 develop open-source version of Bootloader code, including u-boot-1.1.6, vivi.
2440test-r04
- U-Boot1.6.3测试程序,开发板ARMSYS2440.-Test program for U-Boot 1.6.3.
BOOTLOADER
- 适用于ARM9的bootloader,u-boot-1.1.6-ARM9 for the bootloader, u-boot-1.1.6
u-boot-1.1.6
- uboot是一款优秀的嵌入式系统的bootloader程序,嵌入式开发常用工具。-uboot is a good bootloader program embedded systems, embedded development tools used.
u-boot-1.1.6.tar
- GT2440开发板的UBOOT源码 S3C2440芯片-GT2440UBOOT Source
uboot
- 移植 u-boot 1.1.6 到 S3C2440 (nand 启动)-Transplantation u-boot 1.1.6 to S3C2440 (nand start)
u-boot-1.3.4-exp.4-at91sam9263ek-dataflash_cs0.ra
- atmel公司 arm9263 u-boot,超稳定版绝对可用
cmd_yaffs.c
- 基于TQ2440的编译Uboot镜像的源码,支持大于64M的文件系统烧写。(在天嵌自带的光盘Uboot源码u-boot-1.1.6_20100601.tar.bz2的Common下增加此代码,并修改相应的Makefile,得到Uboot镜像就可以支持大于64M的文件系统烧写。烧写时在命令行模式下loadYaffs 0x30000000 root)-Based on the support of more than 64M TQ2440 file system programming of Ubo
u-boot-1.3.4-rc2.tar
- linux u-boot1.3.4-2的源代码-linux u-boot1.3.4-2 source code
u-boot-1.3.3_svn894_tion-ep93xx-series_bin.tar
- U-boot SourceCode fnd Document.
u-boot-1.3.3-icu-20111109.tar
- U-boot执行时,会读取环境变量ethaddr中保存的MAC地址,然后写入MAC地址寄存器,如果ethaddr为1,则重新生成MAC地址并存入ethaddr中,同时写入MAC地址寄存器。 uboot主要作用是升级程序、加载内核等。-U-boot execution, reads the MAC address stored in the environment variable ethaddr, and then write the MAC address of the register,
u-boot-1.1.6_OpenJTAG
- 使用JLink间接烧写S3C2410、S3C2440开发板Nor、Nand Flash源码在线!--The use of indirect JLink programmer S3C2410, S3C2440 development board Nor, Nand Flash source online!
u-boot-1-1-6
- 基于S2C2410的BootLoader软件-The BootLoader software based on S2C2410
depend-s3c2410-develop-uboot
- 压缩包里包括u-boot-1.1.6源码,和修改过并且编译成功的.bin文件,可以在s3c2410开发板上直接烧写-Compressed package including u-boot-1.1.6 source code and modify and compile successfully. Bin file, you can direct programming on the s3c2410 develop board
u-boot-1.1.6_T35_20111215
- 基于qt的 串口程序。可实现完美读写。花了我不少时间-Qt-based serial procedures. Can achieve the perfect read and write.
u-boot-1.1.6
- uboot-bootloader for mini2440
u-boot-1.1.1-ppc
- uboot-ppc源代码: 将uboot 移植到ppc处理器mpc8247/mpc8260/mpc8270上,命令丰富、设备驱动详尽(包括SDRAM、NOR Flash, NAND flash, serial, timer, watchdog等等),对学习理解ppc处理器和板卡很有帮助。 -uboot-ppc src: implemente uboot in ppc processor mpc8247/mpc8270/mpc8260。It has a lot of commands, a
tiny210-u-boot-version3.1.tar
- 三星s5pv210 u-boot源码,加源码详细介绍-Samsung s5pv210 u-boot source code, source details
u-boot-1.1.6_GT2440.tar
- 这是GT2440可以用的UBOOT源代码。-This is the the GT2440 can use the UBOOT source code.
u-boot-1.3.4
- 本人的uboot是u-boot-1.3.4版本,我做了修改,完全可以编译通过,适合新手移植使用。-My uboot is a u-boot-1.3.4 version, I made changes, can be compiled through, suitable for novice transplantation using.