搜索资源列表
HK910-test
- 掌宇公司44b0实验平台的测试程序,共16个程序,包含led,数码管,开关,串口,蜂鸣器,实时时钟,键盘中断,ADC,网卡,PS2键盘,UC/GUI-company 44b0-yu palm experimental test platform, with a total of 16 procedures, including led, digital control switches, serial, buzzers, real-time clock, keyboard interrupt,
抢答器
- 扳动定义为“开始”(即enable)的开关后,一排指示灯变亮,之后抢答开始,有4个扳动开关代表4个抢答器,数码管将显示出最先被扳动的开关的序号,同时发出声音,表示抢答成功。若未按“开始”前,有任意开关被扳动,则数码管显示被扳动开关的序号,并发出另一种声音,表示有人抢答。-reached for the definition of "start" (enable) the switch, a row of bright lights changed, after Respond
在六个数码管滚动显示自己的学号(六位)
- 在六个数码管滚动显示自己的学号(六位),每隔一定时间循环移位一次,学号为奇数则左移,学号为偶数则右移。间隔时间可由开关选择1秒,2秒,3秒和4秒。-In the six LED scrolling display their student number (six), rotate once every certain period of time, learning number is odd, then the left, student number is even, then the r
stc232
- 1.通过PC端的串口调试工具,从PC端发出一个十六进制的数, 通过串口传输到单片机,并有单片机通过LED数码管显示其ASII码,而且单片机又将这个数发回PC端,并在PC端显示出来,从而实现单片机与PC机的通讯 2.可以实现对下位机数据实时采集(如温度,程序中设定的是37摄氏度) 3.可以控制流水灯或继电器开关等-1. Through the PC-side debugging tools for serial port, from the PC client sends a hexa
VerilogHDL_code
- 几个常用的接口实验的程序代码,用Verilog HDL语言编写的,包括七段数码管、拨码开关、蜂鸣器、矩阵键盘、串口、I2C、跑马灯等。-Some commonly used experimental procedures for the interface code, using Verilog HDL language, including Seven-Segment LED, DIP switch, buzzer, matrix keyboard, serial, I2C, marquees
Aexp8
- 走马灯(灯光变幻)程序 内容:用DIP的8位开关控制走马灯的花样,用SW3控制走马灯的起/停 运行步骤:1.按下一次开关SW3,开始灯光变幻,再按下一次则停止 可重复进行 * 2.按下SW3后,拨动不同的数码开关DIP,就会出现不同的灯光变幻 * 3.按下"q"或者"Q",退出 -Lantern (lighting changes) program elements: eight with DIP switch control of the pattern lantern, la
digitalclock
- 1、正常情况下在LED数码管上显示时钟和温度。显示格式为:hh.mm tto,其中hh为2位小时数,mm为2位分钟数,中间的.每隔1秒交替亮暗,tt为2位温度,温度范围为-50oC-+50oC,“o”为温度单位摄氏度。 2、假设选用的温度传感器已将温度-50oC-+50oC变换为0-5V电压信号,请完成温度值的采集并进行标量转换,再显示在LED数码管上。 3、应采取数字滤波技术提高温度测量稳定性(如均值滤波)。 4、若闹钟设置的时间到,则闹铃(可以驱动指示灯亮代替)。 5、通过开
11
- 具有8位开关量输入,8位开关量输出(或带有四位数码显示输出),并具有8路AD输入(ADC0809),1路DA输出(DCA0832)的单片机控制系统。系统要求对8位开关量输入信号能够进行监控,8位开关量输出对应8位开关量输入(或用数码显示出来)。对于模拟量输入、输出通道(A/D,D/A),要求编制比例K放大器输出-Switch with 8 input, 8 output switches (or with four digital display output), and 8 with AD i
test
- 将拨码开关全部拨到on,将会看到数码管从 0-9 A-F逐个显示;按下8个按键中的任何一个,对应的LED灯会亮,按第一个按键时,蜂鸣器会响。-All appropriated for the DIP switch on, will see the digital tube display one by one from the 0-9 AF press 8 keys in any one, the corresponding LED lantern light, according to th
test
- 将拨码开关全部拨到on,将会看到数码管从0-9 A-F逐个显示;按下8个按键中的任何一个,对应的LED灯会亮,按第一个按键时,蜂鸣器会响。-All appropriated for the DIP switch on, will see the digital tube display one by one from the 0-9 AF press 8 keys in any one, the corresponding LED lantern light, according to the
ContestResponder
- 逻辑开关K0~K7代表竞赛抢答按钮0~7号,当某个逻辑电平开关置“1”时,相当某组抢答按钮按下。在七段数码管上将其组号(0~7)显示出来。-Logic Switch K0 ~ K7 on behalf of race to answer in the button 0 ~ 7, when a logic level switch set to " 1" when the button is pressed to answer in quite a group. In the s
qdq
- (1) 有一个主持人控制开关和8路抢答按扭,当主持人允许抢答时才能进行抢答操作,并用一个数码管显示抢答选手的号码,同时其他选手不能再抢答。 (2)电路上要加个蜂鸣器的电路,当有选手抢答时蜂鸣器响一下。 (3)要有倒计时功能,开始抢答时开始倒20秒计时,用两个数码管显示,当有人抢答时停止倒计时。 2.2拓展部分 用按键可设置倒计时的时间,范围在5秒到30秒之间。-(1) has a host switch and 8-way control button to an
VHDLdigital
- 7段数码管译码器设计与实现 一.实验目的 1. 掌握7段数码管译码器的设计与实现 2. 掌握模块化的设计方法 二.实验内容 设计一个7段数码管译码器,带数码管的4位可逆计数器 [具体要求] 1. 7段数码管译码器 使用拨码开关SW3, SW2, SW1, SW0作为输入,SW3为高位,SW0为低位。 将输出的结果在HEX1,HEX0显示。当输入为‘0000’~‘1111’显示为00~15, 2. 带数码管的4位可逆计数器 将实验三的结果
c1
- 用两个数码管显示0到99。十位数为0的时候,显示为空白。 用两个按键控制数值的加减,按一次K1数字加1,按一次K2数字减1,数值的范围是从0到99。 再用一个接近开关控制数字的减小,接近开关感应一次数字减1,减到0停止。 -With two digital display 0-99. 10-digit is 0, display is blank. Control values with addition and subtraction of two keys, K1 by a nu
wrong
- 收集8路开关量故障信号,通过RS232送到上位机,并在数码管显示工作状态。-8-way switch to collect fault signal to the host computer via RS232, and the digital display working status.
tiaosudianji
- 可调速直流电机,可用作自制小风扇。速度17级可调节,有全速开关。可用数码管显示速度级别。(Adjustable speed direct current motor can be used as self-made small fan. Speed 17 adjustable, full speed switch. You can use digital tubes to display speed levels.)
ceshi11
- FPGA开发板数码管按键测试程序 数码管跑数 独立按键控制数码管加一 开关控制数码管亮灭(FPGA development board digital tube key test program digital tube running number independent keystroke control digital tube add a switch to control the digital tube)
1
- 设计一个用于篮球比赛的定时器。要求: (1)定时时间为24秒,按递减方式计时,每隔1秒,定时器减1; (2)定时器的时间用两位数码管显示; (3)设置两个外部控制开关,开关K1控制定时器的直接复位/启动计时,开关K2控制定时器的暂停/连续计时;当定时器递减计时到零(即定时时间到)时,定时器保持零不变,同时发出报警信号,报警信号用一个发光二极管指示。 (4)输入时钟脉冲的频率为50MHz.(Design a timer for a basketball match. Requirement
SHUMA
- 1.单按钮起停控制 2.数码开关调整延时时间N,N可在5-9以秒为单位调整系统 3.用数码管显示延时时间(1. single button start and stop control 2. digital switch adjusts the time delay time N, and N can adjust the system in 5-9 seconds. 3. using digital tube to display time d
1297506开关仪表按钮数码管等控件合集【C#】
- C# 带源代码的开关仪表数码管控件集合,包括汽车仪表盘等等, 全部由C#写成。(C# Instrument Widget)