搜索资源列表
DE2_SD_Card_Audio.DE2上SD卡的读写代码
- DE2上SD卡的读写代码，应用环境quartus ii,DE2 on SD card to read and write code
sd_reader.rar
- SD卡读卡器模块的VHDL及软件驱动代码，可作为外设挂接在Avalon总线上。支持以SD模式、4线模式读取。在24MHz时钟驱动下读取速率可达8MByte/s,SD card reader module and software drivers VHDL code, can be articulated as a peripheral bus in Avalon. To support the SD model, 4-wire mode read. Driven by the 24MHz clo
CRC7_CRC16_SD.rar
- Re: CRC7 и CRC16 for SD card If you develope your interfsce to work with sd/mmc card, you need algrithm to check CRC7 & CRC16 it s very fast progtamm/algrithm to calculate CRC , Re: CRC7 и CRC16 for SD card If you develope your interfsce to
ZLG_SD.rar
- ZLG LM3s SD卡 软件包,包括SPI接口,SD卡读写,ZLG LM3s SD card package, including the SPI interface, SD card reader
altera_up_avalon_sd_card_inter
- 基于VHDL的SD卡IP核，Altera公司推出的大学计划！最新版本9.0,VHDL-based IP core of the SD card, Altera' s university program launched! The latest version 9.0
SPI_SD_initial.rar
- 在stm32之下透過SPI初始化SD卡記憶體,Stm32 under the SD card through SPI memory initialization
SD-Usb-sch
- SD卡U盘的硬件原理图。 对SD卡 和 U盘 的开发有点帮助！-SD card U disk hardware schematics. On the SD card and U disk helping to develop a bit!
SD
- SD.C是用S3C44BOX的SIO口读SD卡,模拟SD.C是用IO口模拟SPI口读SD卡.使用的是S3C44BOX,如果是其他MCU可以对应修改低层的SPI读写函数即可.-SD.C the SIO is S3C44BOX I read SD card, analog IO I SD.C simulation using SPI I read SD card. Using S3C44BOX, if it is the corresponding amendments to other MCU c
Based-on-ARM7-LPC2478-and-SD-card-readers-voice-pl
- 该代码为C语言所编写的，开发环境为Keil uv2或Keil uv3。代码所实现的功能是：将自然界的声音转换成数字代码，然后通过ARM7将数据以*.mp3格式存入SD卡中，并可以回放。所需的硬件平台是NXP公司的ARM7（LPC2478）开发板一块，另外SD卡带有文件系统，是本人移植的。-The code is written in C language, development environment for Keil uv2 or Keil uv3. Code implemented fun
STM32_SD_SPI_Driver
- SD卡底层驱动，使用STM32的SPI接口与SD卡通讯，采用SPI方式. 文件系统中TFF.C和TFF.H文件不需要改动，只需要改动SD卡操作函数即可即可。 -SD card low level drivers, use the STM32' s SPI communications interface and SD card using SPI mode. File system TFF.C and TFF.H file without changes, just need to c
SD
- 基于STM32的SD卡读写程序，已经应用到产品中！-The SD card reader based STM32 procedure has been applied to the product!
sd
- MSP430F149的SD卡模块。测试是可以用的。。 ti的标准接口。-MSP430F149 SD card module. Test can be used. . ti' s standard interface.
TFT-SD
- 基于普中51/ARM开发板的TFT屏幕（带SD模块）的一些功能代码，包括电子相册，温度显示等多重功能的代码。-Development board based on the S & P in 51/ARM TFT screen (with SD Module) features code, including electronic album, temperature display multiple functions of the code.
SD
- 这是一个SD卡的FAT文件系统的实现，该版本时针对周立功的LM3S8962开发板的，可以修改里边相应管脚的设置应用到其他的板子上；该程序也能在51单片机上成功运行。-This is an SD card FAT file system implementation, the version developed for Zhou, who' s LM3S8962 board, you can modify the settings inside the corresponding pins
sd
- 实现SD卡的基本读写操作,单个块和多个块的读写-the SD s read and write
SD Card Reader ARM
- it's a sample project for interfacing SD card with arm
SD Card Reader ARM
- it's sample project for interfacing SD card with ARM
F28335 SPI SD card
- Used on TI' s DSP chip comes TMS320F28335 SPI functions to achieve SD card reader, SD card reader on the basis of the program and transplant support FAT32 file system fatfs, maximum support 32G SD capacity, with high reference value, there is no ques
LC-SD卡模块
- 支持MP3、WAV解码格式。 2、支持采样率(KHz):8/11.025/12/16/22.05/24/32/44.1/48。 3、24位DAC输出，动态范围支持90dB，信噪比支持85dB。 4、完全支持FAT16/FAT32文件系统，最大支持32G的TF卡，支持32G的U盘。 5、支持UART串口控制语音播报功能，可控制播放，暂停，选曲，音量加减等功能，最大选曲65535首曲目，波特率9600 bit/s。 6、支持IO触发功能，8个IO口单独触发8首曲目或8个
SD SPI模式verilog外加modelsim仿真结果
- SD卡的SPI模式verilog代码，外加modelsim仿真结果。(SD card's SPI mode Verilog code, plus the simulation results of modelsim.)