搜索资源列表
M0516_TX_1C_EN25F32_PASS
- 这是一个ARM_cortex_M0读写SPI flash 驱动程序,经验证可以正常操作(SPI 芯片可以是EN25F32,W25F16)etc-This is a ARM_cortex_M0 write SPI flash driver, normal operation can be proven (SPI chip can be EN25F32, W25F16) etc
MX25L1602Drv
- MX25L1602 spi flash 驱动软件，可以移植支持所有的MX25L系列-MX25L1602 spi flash driver software can support all MX25L transplant series
CANBUS
- WINCE6.0下采用MCP2515实现的SPI转CAN的API封装项目以及测试程序 主芯片平台为S3C6410-Used under WINCE6.0 to CAN MCP2515 SPI achieve an API package projects and test procedures for the main chip S3C6410 platform
monispi
- stc89c51单片机实现模拟SPI函数，读者可以自己调用-stc89c51 MCU simulation SPI function, readers can call their own
ARM003H
- 基于MCP2515的程序，对开发CAN总线有一定的帮助，这个是模拟的SPI时序，对于没有SPI口的芯片，可以参考-MCP2515-based procedures, the development of CAN bus has some help, this is a simulation SPI timing, for no SPI port of the chip, you can refer to
ARM000H
- MCP2515的程序，对开发CAN总线有一定的帮助，在硬件设置方面与之前上传的略有不同,模拟的SPI时序-MCP2515 procedures, the development of CAN bus has some help in hardware settings respects with previously uploaded slightly different simulated SPI timing
spidev_test
- linux下面的spi用户态程序，非常实用，使得程序员不必编写内核驱动，使用该驱动能够易于spi驱动debug-The following user mode linux spi procedures, very practical, so that programmers do not have to write a kernel driver, use the drive can be easily spi driver debug etc.
spi_adda
- 实现FPGA读取AD转换的数据，AD芯片我采用的是ADS7844，采用的是SPI通信方式-achieve the function of read the data from the AD transform chip.the communciation method is SPI.i have tested the code ,and it can work.
TFT_ILI9320
- 主要是了解如何采用各种不同的颜色显示不同的界面，同时可以将预先设置的字符用不同的颜色进行显示。 另外，在TFT LCD屏显示的基础上，还有TFT LCD屏的触摸功能。神舟III号标配的2.8/3.2寸LCD模块还包含了SPI接口的触摸芯片，可以将触摸采样到的数据在LCD屏上进行进行显示。-Mainly to understand how to use various different interfaces displayed in a color, while the character
omap3_spi.c
- DM3730uboot启动过程中没有加载SPI驱动，也就是说在uboot阶段时无法使用SPI功能。本源码根据TI别的平台的uboot启动代码修改而来，已经经过验证，适合DM3730 SPI。使用时需要注意配合自己的SPI器件修改DM3730 SPI相应寄存器值，比如是上升沿还是下降沿，有没有DC/X等等。-DM3730uboot not loaded during startup SPI driver, that can not be used in stage uboot SPI functi
SPI_xiugai
- 这是一个修改SPI的源码，半成品，可以拦截socket，大家拿到的话根据自己需要修改。-This is a modification of SPI source, semi-finished products, can intercept socket, so we got to modify according to their needs.
SPIads8332
- spi接口的ad芯片ads8332驱动代码，主芯片为c8051f3xx系列，更改IO口配置即可使用，包含AD数字滤波部分。-spi interface ad chip ads8332 driver code, the main chip for c8051f3xx series, change IO port configuration can be used, including AD digital filter section.
spi_verilog
- 使用verilog编写的spi传输模块，已经通过验证，有仿真文件，可以传输信息。-Prepared using verilog spi transmission module, has been validated with simulation files, you can transfer information.
nrf24l01-read-only.tar
- 非常经典的24L01收发程序，使用SPI，底层驱动是AVR的，稍微改变一下可以用到各种控制器上。-Very classic 24L01 transceiver procedures, the use of SPI, the underlying driver is the AVR, slight change can be used on a variety of controllers.
SPI410
- 利用低速单片机c8051f410的PCA功能进行编程，利用其自带的SPI通信。包含了master，slaver和单片机对EEPROM的通信-The use of low-speed microcontroller c8051f410 of the PCA functions can be programmed, using its own SPI communication. Contains the master, slaver and the EEPROM chip communicatio
STM32_FATFS20130809
- 在stm32f107上移植了Fatfs文件系统来访问SD卡，SD卡与CPU通过SPI接口连接，传输采用了DMA，可以快速读写文件-In stm32f107 on the transplant Fatfs file system to access the SD card, SD card connected to the CPU via the SPI interface, the transmission uses a DMA, you can quickly read and write f
ch376_sd_spi
- ch376的spi程序例子，可以供刚使用ch376芯片的人作参考-ch376 the spi procedures example, can be used for people who have just used as a reference chip ch376
CANaI2SaI2CaSPIaSSP
- 各常用同步总线协议的介绍和对比。包括CAN、I2S、I2C、SPI、SSP总线。-The introduction of common synchronous bus protocol and contrast. Including CAN, I2S, I2C, SPI, SSP bus.
shangweiji--xg
- 利用vb编写的上位机界面程序，能实现串口通讯且界面美观。-this program based on the Visual Basic ，it can conect to the stm32 by SPI。
danpianjitongxin
- 51单片机spi程序和iic程序，能实现spi通信和iic通信，能较好移植。-51 SCM spi procedures and iic procedures, to achieve communication and iic spi communication, can better transplant.