搜索资源列表
nandflash
- STM32f103 IO模拟总线访问三星的NANDFLASH K9F1208.目前网上的相关资料比较少，多数为直接通过FSMC访问。代码实现包括page，block，擦除与读写，在实际硬件平台上测试，绝对能用。鉴于本人走了不少弯路，故分享给大家。(STM32f103 IO analog bus access to Samsung's NANDFLASH K9F1208., the current online related data is relatively small, mostly th
baseflight-master
- baseflight飞控 stm32f103 KEIL程序，可用于二次开发.(Baseflight flight control STM32F103 KEIL program, can be used for the two development)
1-温湿度传感器DTH1120170926
- 基于stm32f103系列的芯片，可以实现串口实时显示当前温湿度值。(Based on the STM32F103 chip, the serial port can display the current temperature and humidity value in real time.)
duoji-qudong-5
- stm32f103系列单片机，模拟端口输出PWM控制舵机，每一路角度速度可控，普通I/O口都可用于PWM输出(stm32f103 series of single-chip, analog port output PWM control steering gear, each way the speed control, ordinary I / O port can be used for PWM output)
stm32智能充电器
- 这个是一个stm32f103的数控电源充电器，可以实现自动充电等等(This is a STM32F103 CNC power charger, can realize automatic charging and so on)
inertial navigation
- 利用STM32F103作为主控，陀螺仪作为惯性传感器，可导航小车在无GPS情况下走直线，误差照成由于没增加磁陀螺的原因无法校准航向角的累积误差，所以长时间运行会带来累积误差，如果有不需要磁陀螺就可以校准的方法欢迎大家给我留言提建议。(By using STM32F103 as main control, gyroscope as inertial sensors, navigation in the car without GPS. Straight line error according t
电阻触摸屏—触摸画板
- 基于stm32f103及电阻式触摸屏开发的画板程序，开机后首先进行触摸校准，进入画板界面后可选择画笔粗细、选择颜色，附带橡皮擦功能。(Based on STM32F103 and resistive touch screen, the sketchpad program is developed. After touchdown, the touch is first calibrated. After entering the sketchpad interface, you can choo
STM32ADC
- 项目用到的STM32F103芯片多路12位高精度AD采集处理，带FIR滤波器，效果精度非常好，绝对可以用。(The STM32F103 chip used in the project is multiplex 12 bits high precision AD acquisition and processing, with FIR filter, the effect precision is very good, absolutely can be used.)
stm32UCOSII
- 项目用到的移值到STM32F103芯片的UCOS3操作系统，可以显示在TFT液晶屏上，改正过后的带显示界面的操作系统，效果非常好，直接移值绝对可以用。(The UCOS3 operation system that moves to STM32F103 chip can be displayed on the TFT LCD screen. After correction, the operation system with display interface is very effectiv
READER100
- 读卡器底层软件，可用于读取身份证卡，使用STM32F103芯片+TRF7963(Card reader software, can be used to read the ID card, the use of STM32F103 chip +TRF7963)
STM32版FX2N源码&原理图(可直接移植)
- FX2N源码V3.8版的使用基本说明： 编译语言：C语言 FX2N源码V3.8版是根据三菱FX2N的PLC通信协议、通信命令以及基于STM32F103系列单片机上编写运行的程序，可以直接利用三菱编程软件编写梯形图下载运行，无需任何转换。 注：1）目前在STM32F103RD/STM32F103VC/STM32F103VD/STM32F103VE/STM32F103ZE测试通过； 2）本程序不完全支持所有梯形图指令，如果需要其他的功能，需要亲自己修改代码， 编译环境：
24位ADC LTC2442
- 使用MDK5编写的STM32F103的驱动，可以从24位的AD LTC2442芯片读取电压(Using the STM32F103 driver written in MDK5, the voltage can be read from a 24 bit AD LTC2442 chip)
Fire_Template
- STM32F103工程模板，可直接编写main.c(STM32F103 engineering template, main.c can be written directly)
ADS7886
- stm32F103平台下写的 ADS7886驱动，实测可以正常使用，由于要的可以下载，谢谢使用(ADS7886 driver under the stm32F103 platform, the measured can be used normally, thanks to the need to download, thanks for use)
DMA实验nvic
- 用stm32f103控制nand flash，采用DMA方式把FPGA传输过来的数据存到Flash里，输入f1,f2,f3可以实现读取FLASH内容到串口助手。(The NAND flash is controlled by STM32F103, and the data transmitted by FPGA is stored in Flash by DMA way. Input F1, F2, F3 can read FLASH content to serial assistant.)
RCT6 MPU6050六轴传感器实验
- STM32F103，mpu6050，0.96寸OLED显示，可动态显示，也可传到串口显示(STM32F103, mpu6050, 0.96 inch OLED display, can be dynamically displayed, and can also be transmitted to the serial port display.)
简易信号发生器
- 使用STM32F103产生基本波形，频率可自定义(Use STM32F103 to generate basic waveform, and frequency can be customized.)
can_bootloader
- 基于STM32F103的can_bootloader源程序，包括can协议，可用于调试和研究学习can bootloader的实现。
IAP-Demo-20180827-ok-1
- STM32 IAP参考代码，可以实现Boot和App的相互跳转,STM32F103,Ymodem协议(STM32 IAP reference code, can achieve the jump between Boot and App.)
TIM—全彩LED灯
- 使用STM32f103开发板，全彩灯实验，色彩可通过延时来改变(Use STM32f103 development board, full color lantern experiment, color can be changed by delay.)