搜索资源列表
STM32用SPI操作SD卡,并移植FATFS文件系统
- 用Keil 4.12编译器编译的,已经测试过,FATFS所有的应用程序都可以执行
STM32_Reader
- 基于STM32编写的TXT阅读器,供大家讨论研究。1. 程序是刚刚才写出来的,没有整理,(也很懒,不想整理),只是修改了几个函数,用了FATFS文件系统(这个系统,我也不了解,只是用了它两个函数).2必须在SD卡根目录下有个TEST.TXT文件.(我测试300K的TXT都可以正常使用,但是有极少部分文字显示乱码,不知道是字库的问题,还是我程序的问题)3.程序使用:开机后,按 左键-------录入test.txt文件(文件大的要等好几十秒) -Based on the STM32 prepa
FATFS_VS1003
- STM32单片机,SD卡加FATFS文件系统加VS1003,SPI总线控制例程-STM32 MCU, SD card with FATFS file system plus VS1003, SPI bus control routines
Tiny-FatFs_ffsample007
- 不错的Tiny_Fat代码,包含MMC/SD等驱动-good file system....
prog
- grqd_xp原创,移植了FATFS到LPC2148,测试了写的速度,很满意,280K/S;UCOSII用的是2.76的,建立了5个简单的任务;建立了字库,写汉字很方便;现上传源程序。(内有原理图,字库文件,SD卡上的图片,ADS1.2的源程序)-grqd_xp original transplant FATFS to the LPC2148, Writing test speed, very satisfied, 280K/S UCOSII used are 2.76, and 5 set
basic-fatfs-sdcard-project-at91sam3u-ek-iar
- 一个可以自动读取SDCARD的范例程式。-A EXAMPLE FILE OF AUTO READ SDCRAD
SD_MP3
- SD卡MP3播放器,8051为核心。fat文件系统-SD card MP3 player, 8051 as the core. fat file system
STM32_fatfs_shell_SDHC
- 实现了FATFS+SDHC+SD2.0+SD1.1+Shell+DataFlash。这样功能整合网上绝对没有。大约20 的代码是出自本人。 操作方法: 上电后,发字符串!s0! 进入dataflash shell模式,发字符串close则退出shell模式 发字符串!s1! 进入SD卡shell 模式,发字符串close则退出shell模式 支持MMC(没测试),SD1.0 SD2.0(普通与SDHC) 源码已经在Keil4中运行过,基于STM32F103平台 源码
STM32_fatfs_shell_double_mode
- 实现了FATFS+SD1.1+Shell。大约20 的代码是出自本人。 其中实现了的shell命令cmd,ls,pwd,cat等。 这是其中一个版本,为了方便大家阅读,如果有兴趣可以查看我的另外一个,实现了FATFS+SDHC+SD2.0+SD1.1+Shell。 操作方法: 上电后,发字符串!s0! 进入dataflash shell模式,发字符串close则退出shell模式 发字符串!s1! 进入SD卡shell 模式,发字符串close则退出shell模式
sd_card
- SD card using FAT file system This example application demonstrates reading a file system from an SD card. It makes use of FatFs, a FAT file system driver. It provides a simple command console via a serial port for issuing commands to view and naviga
MP3
- STM32F制作的mp3例子,包含FATFS文件系统,SD卡驱动,VS1003的驱动。-STM32F making mp3 files containing examples, FATFS SD card system, driver, VS1003 driver.
basic-fatfs-sdcard-project-at91sam3u-ek-keil
- at91sam3u4e的sd卡例程 内含文件系统FAT16的 很有价值-at91sam3u4e the sd card, FAT16 file system routines included a valuable
basic-fatfs-sdcard-project-at91sam3u-ek-gnu
- at91sam7的例程 GNU环境 全部工程代码 fat文件系统及sd卡存储-at91sam7 routine GNU environment fat file system, all engineering codes and sd card storage
STM32_SD_Recorder-hardtest
- STM32 SD卡 fatfs文件系统 支持长文件名 可读可写-STM32 SD card fatfs file system supports long file names read and write
STM_SD(no-FATFS)
- 在IAR编译环境下,用STM32读取SD卡数据。无文件系统。-In the IAR compiler environment, read the SD card data with STM32. No file system.
lpc23xx_chan_mci_20090823
- Chans examples for sdcard acce-Chans examples for sdcard access
stm32fatfs
- 在sd卡上移植fatfs,移植成功,已经能用,-FatFs is a generic FAT file system module for small embedded systems. The FatFs is written in compliance with ANSI C and completely separated from the disk I/O layer. Therefore it is independent of hardware architecture. It ca
STM32F10x_FATFS_SPI_DMA
- STM32F103x with SD - FATFS - SPI - DMA.
SDcardPFatfsPLCDPJPEG-touch-program
- . stm32源代码!编译调试成功!功能:从sd卡中读取图片并显示在lcd上,触摸lcd可切换显示图片!带sd卡文件系统,图片解码!. -stm32 source code! Compile debugging success! Functions: reading the image from the sd card and display in the lcd, touch lcd switch display pictures! With sd card file system,
STM32-V3.5-SDPFATFS0.09PUCGUI3.98
- 基于STM32F103ZET6 的神舟III号开发板的 SD+ FATFS+UCGUI3.98 IAR EWARM 6.1工程 基于官方3.5库-Based on STM32F103ZET6 the Shenzhou III development board SD+ FATFS+ UCGUI3.98 IAR EWARM 6.1 works based on the official 3.5 library