搜索资源列表
commsetdeviceid_vc++
- 设备ID烧写程序.exe 软件使用说明: > 1)先打开此程序.设备好串口号.其它取默认值就可以了.打开串口(默认开机自动打开串口1). 然后,设备按OK键开机. > 2)打勾\"自动生成下一个设备ID\" 产品ID会自动加1. 当产品ID达到最大999999时,生产批次自动加1,产品ID置为1000001 > 3)烧写完一台机器后,不用关闭程序,只需将串口插入下一台机器OK开机即可,进入UBOOT,先点击命令发送等握手后,再开始烧写设备ID.
uboot
- uboot代码详细分析。包括u-boot-1.1.6 之cpu/arm920t/start.s 分析、u-boot 中.lds 连接脚本文件的分析、U-BOOT 内存布局及启动过程浅析、从NAND 闪存中启动U-BOOT 的设计、U-BOOT 源码分析及移植;U-BOOT 源码分析及移植;U-boot 在ST2410 的移植,基于NOR FLASH 和NAND FLASH 启动等等;比较全面的讲解-the uboot code for detailed analysis. U-boot-1.1.
s3c-u-boot-1.1.6_rel-4-3-1_20080811.bz2
- This directory contains the source code for U-Boot, a boot loader for Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to initialize and test the hardware or to download and
dm9000x
- u-boot下dm9000a的驱动,b-boot的版本为1.1.6。能够稳定工作,最高速度达到1MB-dm9000a driver for uboot
dm3xx_sd_boot-6.tar
- dm355 sd卡烧写工具的制作工具,用此工具,可实现ubl,uboot,kernel,fs的烧写工作,提高了生产效率-dm355 sd card, programming tools, authoring tools, use this tool to achieve ubl, uboot, kernel, fs of the programming work to improve the efficiency of production
uboot-nand-driver
- 支持大页nand,在移植u-boot1.1.6时可以用到-Support large pages nand, the transplant can be used u-boot1.1.6
9260kernel-porting
- AT91SAM926 ARM9 内核移植手册,非常实用,基于AT91SAM9260-EK开发板。包含以下内容: 1.准备所需要的软件和编译工具包 2.安装ARM-LINUX-GCC工具链 3.安装编译AT91BootStrap Bootloader 4.安装编译Uboot及AT91-Uboot补丁 5.安装编译Linux2.6.22及AT91-Linux补丁 6.安装下载工具AT91ISP及烧写文件 7.NFS根文件系统的建立 8.移植Boa Web服务器 9
u-boot1.1.6.tar
- OK6410 uboot源码包,可编译成uboot.bin文件-The OK6410 source package
uboot1.1.6
- uboot 1.1.6源代码,支持ARM,MIPS,PowerPC等各种嵌入式CPU-uboot1.1.6 source code for ARM,MIPS,PowerPC and so on.
u-boot-2010.03-tekkaman-master
- u-boot是德国DENX小组开发的用于多种嵌入式CPU( MIPS、x86、ARM、PowerPC、XScale等)的bootloader程序, UBoot不仅支持嵌入式Linux系统的引导,还支持VxWorks, QNX等多种嵌入式操作系统。u-boot是GPL下资源代码最完整的一个通用BootLoader支持大量开发板:214个开发板(u-boot1.1.6),有大量的外设驱动。-U-boot is a German DENX group for the development of a
bootloader
- 嵌入式开发的参照源码。 u-boot-1.1.6.tar.bz2 是uboot1.1.6最原始的代码 u-boot-1.1.6_OpenJTAG_nand_large_page.tar.bz2 是修改后的uboot,支持大页nand,usb烧写程序 这个vivi的源码是针对64M(小页)NANDFLASH的 TX2440A开发板上使用的是256M(大页)NANDFLASH 编译出的程序不能运行在TX2440A开发板上 这个源码只供学习研究-Embedded develop
uboot1.1.6-V5.10-2014-07-15.tar
- ok6410 uboot 内核源码 uboot_sourcecode-ok6410 Uboot kernel source uboot_sourcecode