搜索资源列表
lpc32xx.linux.u-boot.patches.tar
- LPC32xx patch for linux with Uboot development
sboot-1.0.1.tar
- arm-linux-gcc下编译通过的sdboot,使用了u-boot的Makefile
porting-documentation
- s3c2440 u-boot的移植文档,很详细。-s3c2440 u-boot porting documentation, very detailed.
u-boot-1.1.6_OpenJTAG_nand_large_page.tar
- This source code is very useful in linux study. It will tell you how to transplant a linux kernal to ARM.First, it not only support 128 nand but also support 256 nand.Secondly,it support download in USB. support dm9000,cs8900,cd card and so on.
u-boot-mini6410-20101106.tar
- mini6410的uboot源码,最新版。-mini6410 the uboot source, the latest version.
u-boot-2009.01-d902-20100909
- i.mx515底层BOOTLOADER程序,请将扩展名改为.tgz后使用-i.mx515 bottom BOOTLOADER procedures, please change the extension. tgz before use
u-boot-1.1.6.tar
- GT2440开发板的UBOOT源码 S3C2440芯片-GT2440UBOOT Source
Ubootstart
- bootloader综述 u-boot介绍 u-boot编译及配置 u-boot启动过程及工作原理 u-boot命令使用过程 u-boot移植过程-Introduction Summary u-boot bootloader u-boot u-boot compile and start the process of configuration and working principle of u-boot u-boot command uses the process of
uboot
- 移植 u-boot 1.1.6 到 S3C2440 (nand 启动)-Transplantation u-boot 1.1.6 to S3C2440 (nand start)
UBOOT
- 介绍了U-BOOT的功能、命令和移植到不同平台的方法和注意的地方-Describes the U-BOOT features and ported to different platforms where methods and attention
Uboot
- u-boot的启动流程 操作指令以及具体步骤-u-boot startup process instructions and the specific steps
cmd_yaffs.c
- 基于TQ2440的编译Uboot镜像的源码,支持大于64M的文件系统烧写。(在天嵌自带的光盘Uboot源码u-boot-1.1.6_20100601.tar.bz2的Common下增加此代码,并修改相应的Makefile,得到Uboot镜像就可以支持大于64M的文件系统烧写。烧写时在命令行模式下loadYaffs 0x30000000 root)-Based on the support of more than 64M TQ2440 file system programming of Ubo
U-Boot-cmd
- uboot即 bootloader的命令介绍,很有用-uboot bootloader command is introduced, useful
linuxTFTP
- linux下建立了tftp服务器,u-boot可以直接登录到你的主机上了,不用再切换到windows下 用tftpd32.exe来建立服务器了。-Linux tftp service command
linux_2_6_for_at91rm9200_zzk
- linux u-boot和kernel移植方法-linux u-boot and kernel porting
uboot_mx5x
- u-boot for Freescale i.MX 5x
u-boot-2010.03
- uboot 2410上的移植,sdram、norflash可启动运行。包括启动部分,网络部分,命令解析部分以及Linux的引导部分-the uboot 2410 on the transplantation, the sdram, norflash can be up and running. The guide portion of the part of the network portion of the start command parsing part of Linux.
u-boot-flash-remove
- FLASH的编程原理都是只能将1写为0,而不能将0写为1.所以在FLASH编程之前,必须将对应的块擦除,而擦除的过程就是把所有位都写为1的过程,块内的所有字节变为0Xff。 对FALSH进行的最基本操作由读操作,写操作,和擦除操作。以下将详细介绍,所有的都是参考sst39vf1601 datasheet -FLASH programming principles are the only one written as 0, can not be written as one. Befo
yaffs2.tar
- 支持flash的坏块屏蔽,需要u-boot支持,假如u-boot版本很高可以在make menuconfig里选择。-Support flash bad block shield, u-boot support, high u-boot version can be selected in make menuconfig.
u-boot-2010.09.tar.bz2
- gt2440 移植2010年9月 下载后 把.zip去除-ubbot