搜索资源列表
lcd4linux-0.9.11.tar
- 嵌入式linux下液晶编程院代码, 可以在LINUX2.4内核下运行-under Embedded Linux programming LCD hospital code, the kernel can run LINUX2.4
linuedisplay
- linux环境下的各种液晶屏的内核支持，适用于2410开发板-linux environment of the LCD screen kernel support, application development board in 2410
lcd_driver
- 用于Linux 2.4内核的LCD及键盘驱动，并包含测试程序，及对应的MAKEFILE-Linux 2.4 kernel for the LCD and keyboard-driven, and includes testing procedures, and the corresponding MAKEFILE
linux-2.6.14
- 飞凌公司TE2410开发板自带的linux2.6.14内核源代码，内核中加入了cs8900a网卡，串口1,2,3驱动，USB HOST驱动，USB摄像头驱动(ov511芯片)，声卡驱动，液晶屏驱动，开机图片-TE2410 development board飞凌company linux2.6.14 own kernel source code, the kernel is added to the network card cs8900a, 1,2,3-driven serial, USB HO
my-2440-lcd
- linux2.6.30内核在s3c2440上的设备驱动的例子，利用新的os API编写的驱动。-linux2.6.30 the kernel' s device drivers s3c2440 example of the use of new os API driver prepared.
RA8835_lcd_driver
- RA8835 LCD驱动芯片的linux下驱动程序，使LINUX内核版本是2.6.30-RA8835 LCD linux device driver program, and the kernel version is 2.6.30
S3C2410
- 该源码是基于ARM9 S3C2410A的LCD移植程序，LCD选用的是Sharp LQ080V3DG01 ，源码主要对LCD进行设置、初始化、并对LINUX kernel内核进行配置-。-The source is based on the ARM9-based LCD transplant program in the S3C2410A LCD optional Sharp, LQ080V3DG01 main source for LCD setup, initialization, and
mini2440-um-20081027
- mini2440基于2.6内核的源码驱动，网卡，usb，lcd都已经调试成功-Mini2440 based on the 2.6 kernel source drive, nic, usb, LCD has been successful commissioning
s3c6410_LCDdriver
- 6410 Linux 3.0.1内核 LCD驱动源码 带有Kconfig和Makefile 适合新手-6410 Linux 3.0.1 kernel LCD driver source code with Kconfig and Makefile for novices
kernel_lcd
- s3c6410加入到linux内核的lcd驱动-added to the linux kernel s3c6410 lcd driver
lcd
- 基于linux2.6内核的，运用时s3c2440的LCD的底层驱动，特比基础的框架结构，非常完整-Linux2.6 based kernel, when using an LCD s3c2440 underlying drivers, special than the base of the frame structure, very complete
atmel_lcdfb_driver_for_linux
- linux驱动lcd液晶屏幕的驱动程序，lcd液晶驱动， AT91sam9263板子液晶屏驱动的详细步骤和方法，我的屏幕是640x480，牌子三菱。用的atmel的arm9驱动lcd display；修改linux内核源码linux内核驱动源码； 换屏幕需要修改3个文件，lcd驱动如何编写，如何修改lcd驱动，linux液晶驱动，linux frame buffer驱动 /////////////////////////////////////////////////////// 一
01lcd_font
- 针对友善之臂4412开发板裸机下操作LCD显示驱动，注：Lcd的背光默认没有开启，可以通过先加载linux内核来开启背光，然后按reset键重启进入u-boot来运行自己的程序；-Note 4412: Lcd s default backlight is not turned on, you can first load the linux kernel to open the backlight, and then press the reset key to restart into the
hd44780.7z
- HD44780 lcd 驱动，可以直接放在kernel 源码目录下，不过要自己在makefile中添加编译(the driver for HD44780 under linux)
ili9805c_dsi_vdo_kgm_vga
- MTK平台ili9805c驱动,kernel部分代码(mtk ili9805c driver of kernel patr)
820-lcd驱动移植
- 820-lcd驱动移植 高通平台lcd驱动，包括lk和kernel的lcd时序参数配置(Qualcomm platform LCD driver development notes, including lcd and kernel lcd timing parameters configuration)
Open-Q? 820 (APQ8096)环境搭建
- Qualcomm platform LCD driver development notes, including lcd and kernel lcd timing parameters configuration