搜索资源列表
u-boot-1.1.3.tar
- uboot 最新版本的bootloader,可以生成LINUX内核镜像文件,里面各种驱动程序都是通用的。-uboot latest version of the Bootloader and can generate LINUX kernel image file containing all drivers are generic.
vivi-br-release(20060330).tar
- arm9的bootloader,适合通用2410x平台 vivi.pal(20051228)支持tv输出和vga输出,vclk为26.25mhz vivi(20060330)支持vga输出和tv输出,vclk为25mhz 以上两个vivi均编译自vivi-br-release(20051228).tar.gz 在两个不同vivi间切换的方法是在源文件“/include/platform/smdk2410.h”中打开或者取消对PAL640480宏的定义: #define PAL
armboot-1.1.0
- Excellent Bootloader with a lot of features for arm, can be used for homebrew applications or for learning how a bootloader works, it has support for networking and yet has a very small size. support for filesystems, flash disk, flash, cf etc present
s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2
- 三星强片S3C6410开发板的bootloader源代码,注意为了能上传通过,在文件后缀添加了.zip,可以在下载完成后去掉这个后缀-Samsung S3C6410 film development board' s bootloader source code, pay attention to in order to be able to upload through the file suffix added. Zip, can download to remove the suffix
BootLoader
- 嵌入式系统BOOTLOADER烧写程序,测试过可以用-Embedded systems programmer BootLoader procedures can be tested
BootLoader
- 用于开发Linux的Bootloader源代码,可用于Bootloader代码的移植与编译-Bootloader for the development of the Linux source code, can be used for transplantation with Bootloader code compiler
sjf2410_linux
- You can use this as one method to un-brick your Neo1973, in case your bootloader has been corrupted. sjf2410-linux is a linux-enabled version of the sjf2410 tool. It allows you to use a wiggler compatible JTAG Probe to program NAND and NO
Jflash-s3c2410.tar
- 已经编译好的烧写uboot的工具,解压之后可以直接运行。适用目标为s3c2410等系列。-It is a tool ready for boot the bootloader,and you can use it straightly after you tar it
u-boot-1.1.6_nand_flash_2440.tar
- 可在2440上启动的uboot代码,支持从nandflash启动。-it s the bootloader(uboot) for s3c2440,and this bootloader can boot from nandflash.
H-jtag_uboot
- 通过Hjtag烧写bootloader的详细解释,可以与Jtag烧写形成对比-Bootloader by Hjtag detailed explanation of the programming, the programming can be contrasted with the Jtag
myboot2
- 编写基于s3c2240的bootloader。可以实现基本的命令和shell界面。-Prepared based on s3c2240 the bootloader. Can realize the basic commands and shell interface.
base-on-PowerPC-embeded-Linux
- 本书详细地介绍了如何打造一个完整的嵌入式Linux 主要内容包括 Bootloader定制 Linux内核定制 LinuxRootfs定制 Linux守护进程定制 Linux设备驱动编程 Linux编程 实时 Linux 扩展等 同时本书结合PowerPC芯片 介绍了PowerPC芯片的基本结构 配置引导以及开发方法 本书的特点是注重实用 每篇内容都有具体的实例供参考 读者阅读了本书后 能够快速地在嵌入式PowerPC平台上运行起嵌入式Linux操作系统 开始系统的设计和研发本书可供Powe
Boot
- 自己模仿U-BOOT写的一个Bootloader,可从Nor或Nand启动,已经实现多命令解析,TFTP下载,NAND Flash烧写擦出,定时引导Linux内核等功能.目前该版本只能跑FS2410,如果需要跑其他平台需要修改一些地方的代码.-Write their own imitation of a U-BOOT Bootloader, or Nand Nor can start multi-command has been parsed, TFTP download, NAND Flash
boot
- 自己写的基于6410的bootloader,可以引导linux-Wrote based on the 6410 bootloader, you can boot linux
imx28-ramboot-bootloader
- imx28x系列芯片源码,有ram启动方式,不用烧结flash即可实现boot调试(Imx28x series chip source, there are ram boot mode, without sintering flash can achieve boot debugging)