搜索资源列表
ADTest
- "led+bell驱动.rar"开发板上led和bell的驱动程序,"LedText.rar"是led和bell的应用程序 “串口测试.rar”是串口测试程序。串口驱动中已包含三线串口 “温度测试.rar”是温度传感器测试实验,驱动与应用做在一起的 “LedControl.rar”包含led、bell、key的测试程序,驱动与应用做在一起的。-"led+ bell, drive rar" development board led and bell driver t
led_and_button-lg
- 同时测试led灯与按键驱动程序的测试程序,基于mini2440开发板的!-Test led lights and the key driver test program, mini2440 development board!
leds-gpio
- 控制led灯的驱动程序,也就是流水灯,程序中有4个led灯,依次按照先后顺序亮与灭-Control driver led lights, light water, 4 led lights in the program, followed in accordance with the sequence of bright and off
LED_driver
- 控制一个LED灯的驱动 开发板是S3C2440-Control an LED lamp driver S3C2440 development board
bitctl
- linux下面2.6.24版本内核的位控制的驱动代码,实现了led发光二级管的控制。-bit linux 2.6.24 version kernel driver code control, led light emitting diode control.
button
- 简单的按键linux驱动程序,里面有两种模式,一种是扫描模式,一种是中断模式。中断模式是按键驱动led-Simple key linux driver, there are two modes, a scan mode, one is the interrupt mode. The interrupt mode key driver led
pwm
- 蜂鸣器的驱动,即让led等计数3后,让蜂鸣器开始响 -After the buzzer driver, that led count 3, the buzzer start ringing
01led.tar
- s3c6410 开发板LED灯的裸板驱动-bare board driver s3c6410 development board LED lights
DE2_70_NIOS_DEVICE_LED
- 关于DE2_70板子作为usbslave连接到pc机上,pc作为host端向DE2_70发送数据包,当DE2_70收到数据包时其上led数码管一次数字(依次累加),其中它的fireware可以作为我们移植ISP1362 Device Controller Driver到uClinux的参考-The DE2_70 board as usbslave, connected to the pc, pc as the host side to send packets to DE2_70 When DE
work
- 驱动 点亮LED灯 并且有测试代码,可作为模块加载 只需根据具体寄存器修改部分代码即可-the driver is used to test LED
led_driver
- 双十实验箱led实验代码,包括驱动源代码以及led的测试程序-Double Ten experimental box led experimental code, including the driver source code and the LED test program
4_key15_simple
- 这是一个键盘驱动,是在ARM上实现的,通过按键控制LED灯-This is a keyboard driver on ARM keys to control LED lights
leds
- AM335X-EVB下采用GPIO驱动LED的程序,可根据需要进行修改。-AM335X-EVB GPIO driver LED program can be modified as needed.
led_io
- linux 驱动 对于 采用IO内存方式控制LED 在TQ2440测试成功-linux driver for the use of IO memory mode control LED successfully tested in TQ2440
driver_led
- 基于S3C6410处理器。ok6410的led驱动及测试程序-Based on S3C6410 processor.Ok6410 led driver and testing procedures
driver
- 一个led驱动的优化版本。不依赖硬件平台,使用只需把修改宏定义对应各led即可。压缩包中还包含一个用户空间的封装程序,以简单明了的方式调用该驱动。-Led a drive optimized version. Do not rely on hardware platforms, simply modify the macro definition corresponding to each led to. Compressed package also contains a user-space
200wYDJ_9-20
- 按键LED驱动,最新冷光源适合医疗设备使用,采用最新驱动亮度达标- Button LED driver, the latest cold light source for medical equipment, using the latest driver brightness standards
imx6q_led_driver
- 我们公司基于IMX6Q自己的硬件平台上的Linux系统下的GPIO-LED驱动。-Our company based on IMX6Q own hardware platform under the Linux system GPIO-LED driver.
led
- 嵌入式设备驱动,对应mini2440,运用时makefile文件需要修改内核目录-Embedded device driver corresponding mini2440
myleds
- LED驱动可以说是hello world之后最简单的驱动模块了.如果自己写一个LED驱动那是很简单的(The LED driver can say is the most simple driver module after hello world. If you write an LED driver that is very simple)