搜索资源列表
61IC_S84
- DM6467 源码，很好的ARM入门资料，可以直接载入-DM6467 source code，good arm study file，you can load directly
ydfs_demo_1.07.tar
- ydfs is an open source mini distributed file system. It s major functions include: file storing, file syncing, and design for high capacity and load balance. -ydfs is an open source mini distributed file system. It s major functions include: file s
start
- 对于启动顺序有要求，而需要后台跑的，加载生成文件的程序，可以使用此种方法-Required for the start-up sequence, and need the background to run the program, load the resulting file, you can use this method
SPI2UART
- 开发环境Ubuntu10.10 内核源代码版本linux2.6.32.2 交叉编译环境版本V4.4.3 驱动函数说明： 该代码将S3C2440的SPI口连接SC16IS752，扩展为2路串口。代码分2部分，分别Make后生成2个.ko文件，分别加载即可使用。 本代码项目实用，可参考。-Development environment Ubuntu10.10 Kernel source code version linux2.6.32.2 Cross-compiler
linux-blk-example
- linux下块设备驱动程序实例，包含makefile的详细工程，可直接编译安装加载，格式化，拷贝数据存储-Under Linux block device driver instance, makefile included detailed engineering, can be directly compiled installation load, formatting, copy data storage
tw6869 driver
- tw686x linux deiver How to build the source code: a) Create the directory what you want. Ex: "\home\stchen\project\driver\". b) Type "make clean" in the directory. c) Type "make" to make th
1th
- 主要用于加载内核启动，包括一些硬件初始化操作等-Primarily used to load the kernel starts, including some hardware initialization operation
Realtek_RTL8188CUS
- 基于linux的瑞昱网卡驱动，载入即可使用-Linux-based Realtek NIC driver, you can use load
smart210_led_driver
- 1.首先加载驱动 insmod smart210_led.ko 2.open( /dev/设备文件名 ,O_RDWR) 3.用ioctl(fd,LED_ON,value) 操作led 第二个参数可以为LED_ON,LED_OFF,LED_ALL 当为LED_ON时第三个参数只能取值1-4 （说明点亮固定led，若第三个参数为3表示点亮第三个led） 当为LED_OFF时第三个参数只能取值1-4 （说明熄灭固定led，若第三个参数为3表示熄灭第三个led） 当为LED
bootloader
- 自己写的bootloader，包含了内存和flash 的初始化，可以引导并启动linux内核。-My bootloader, includes the code to initialize the RAM and flash,can load the linux kernel and start it.
hx711
- 基于树莓派的HX711多个称重传感器的设计-Multiple HX711 load cell design based Raspberry Pi
kernel.tar
- linux0.11内核代码和boch配置文件-a good starting on kacking load
SIM5350_How-to-use-linux-driver.pdf
- Load the Linux driver SIM5350
x-load-1.41.tar
- devkit8000 x-load 1.4.1 verison, for devkit8000 board.
dnw_linux.tar
- this code is for down load code usb to embed board. the compile and run enviroment is linux . can read the readme.txt get the help . -this code is for down load code usb to embed board. the compile and run enviroment is linux . can read the read
DualBoot-Installer
- dingoo 双启动系统你可以通过它加载dingux系统-dingoo dual-boot system, you can load it dingux system
01lcd_font
- 针对友善之臂4412开发板裸机下操作LCD显示驱动，注：Lcd的背光默认没有开启，可以通过先加载linux内核来开启背光，然后按reset键重启进入u-boot来运行自己的程序；-Note 4412: Lcd s default backlight is not turned on, you can first load the linux kernel to open the backlight, and then press the reset key to restart into the
minnow-maker
- combile to moudle,and load to linux,then spidev will be enalbed,you can communicate with spi device
pwm
- 基于6818，内核配置pwm控制器驱动和加载一个自己的pwm驱动模块-Based on 6818, the kernel configure the PWM controller to drive and load one of its own PWM driver modules
usb
- 基于6818，配置内核usb控制器驱动和加载一个自己的usb驱动模块-Based on 6818, configure the kernel USB controller to drive and load one of its own USB driver modules