搜索资源列表
ARM11_s3c6410_touch-screen
- 该程序是基于，ARM11(6410)的触摸屏和串口驱动程序,环境是RVDS2.2，关于触摸屏，我在博客上也有说明，如有疑问请看我的博客，以下是博客地址：http://blog.mcuol.com/TKWTKW/index.htm 如果你有什么成果，希望也能共享出来，只有学会交流，才能不断地进步，不要敝帚自珍！ -The program is based, ARM11 (6410) touch screen and serial port driver, the environment i
uart
- 采用VHDL语言编写的串口驱动程序，已调试通过，能够实现同PC机的数据传输，可读性好，可移植性好-VHDL language using the serial driver has been debugged, to achieve the same PC, the data transmission, readable and portable
LED
- LED数码管显示测试程序。共阴，74LS164 串口驱动-LED digital display test program. Common cathode, 74LS164 serial driver
USB-to-RS232-Driver.ZIP
- PL2303芯片通用的USB转串口驱动程序，支持win7，保证可正常使用-PL2303 USB to serial chip universal driver to support win7, guarantee the normal use
uCos2-20100609
- 友善之臂mini2440上的ucosii实例，支持串口打印和LCD显示的驱动。-An example of ucosii ,tested with mini2440, which supports serial printer and LCD display driver.
sc16is7x2
- sc16is7x2 I2C，SPI转串口芯片linux驱动代码补丁-sc16is7x2 i2c spi to dual serial port linux patch.
SD-CARD-P-FAT32
- 配合SD卡读写驱动实现对SD卡中的文本文件的读取，并将读到的数据通过串口输出到串口终端上，这里使用的是超级终端-SD card reader with SD card drive to achieve a text file to read, and read the data through the serial port output to the serial port terminal, where using HyperTerminal
595SMG
- 595数码管驱动，用于51单片机，使用3个io口，串行驱动数码管-595 digital tube-driven, for 51 MCU, using 3 io port, serial driver digital tube
usbserial
- 常见的usb转串口驱动安装程序，FT232 CH340 PL2303，均经过本人测试-Common usb to serial port driver installation process, FT232 CH340 PL2303, all after I test! !
spi-TLC2543
- Mega16读12位AD芯片TLC2543（硬件SPI传输） TLC2543驱动，将读到的ADC数据通过串口发送到 PC-Mega16 (external 7.37628M)+ TLC2543 TLC2543 driver will read the ADC data is sent to the PC through the serial port
51sehjijingjiang
- 关于51单片机外围电路设计模块及C51编程的源代码，包含AD，DA,GPRS,GPS,电机驱动，液晶屏串口等应用程序，具有完整的源代码与电路原理图，可以直接应用到自己的项目之中-About 51 MCU peripheral circuit design module and C51 programming source code, including AD, DA, GPRS, GPS, motor drive, LCD panel applications such as serial po
S3C2410_serial
- s3c2410上移植好的的串口，可作为驱动编程入门的学习范例-the serial port on the transplant s3c2410 good, entry-driven programming can be used as an example of learning
UCos-II.core.analysis.Transplantation.and.Driver.D
- 《uC/os-II 内核分析.移植与驱动程序开发》随书光盘中的全部源代码，全部通过调试。书中介绍μC/OS-Ⅱ的内核分析、移植过程和驱动程序开发方法。书中首先以μC/OS-Ⅱ在8051系列单片机上的移植为例子，详细剖析μC/OS-Ⅱ的内核和移植过程；然后以串口通信为例，介绍如何为μC/OS-Ⅱ实时内核添加设备的驱动程序；最后介绍μC/OS-Ⅱ在数字信号处理器[DSP]上的移植，以使读者进一步加深对μC/OS-Ⅱ的理解。 -" UC/os-II core analysis. Transpl
ARM9_Linux_UART_driver
- ARM linux下的串口驱动编写，很详细，适合做ARM+linux的朋友仔细阅读-linux UART driver development
st16c554_driver
- 我写的st16c554串口扩展芯片的驱动程序，实现的思想是将st16c554的四个扩展串口当做四个st16c550串口来实现。-I wrote st16c554 serial extension driver for the chip to realize the idea is to extend st16c554 four serial ports as four serial ports to achieve st16c550.
motordriver
- 利用ATMEGA8做的电机驱动，共两个减速电机两个步进电机。主机通过串口控制从机。-a simple motor driver for atmega8
uart1
- C8051F系列单片机串口1驱动程序，采用中断方式，实现了字节的读、写以及字符串的读、写。-C8051F series single-chip serial port 1 driver using interrupt mode, the realization of the byte read, write, and the string of reading and writing.
Stepmotor
- 本程序是基于单片机的步进电机控制程序，与东芝公司的TB6560步进电机驱动芯片配合控制步进电机。主要功能是单片机通过串口接受到相应的步进电机控制命令，然后控制TB6560驱动步进电机执行相应的动作，主要命令有：正转、反转、启动、停止、转速设定、转动角度设定等。-This procedure is based on the chip stepper motor control program, with Toshiba' s TB6560 stepper motor control with
SSD_1305_12832
- ssd1305液晶显示屏的驱动程序，用c语言编写，实现单片机串口的显示。-ssd1305 LCD driver includes the initialization of the chip, display program source code, etc., for single-chip display.
SCI
- mc9s12dg128串口中断驱动函数，一个很不错的驱动函数，希望大家好好看哦-interrupt-driven serial mc9s12dg128 function, a very good driver function, a good hope that we看哦