搜索资源列表
TEF6606_V3.飞利浦推出的一款专门针对车载收音的单芯片IC
- 飞利浦推出的一款专门针对车载收音的单芯片IC，型号NXP TEF6606T//6601T/6621T,目前市面上用得比较广，性能比较好的，评价比较高，完全可以替代LC1787高频头，很多终端客户指定要求用的一款收音IC，有需要的朋友可以参考下,Philips launched a car specifically for the single-chip radio IC, Model NXP TEF6606T// 6601T/6621T, currently available in the m
LPC2300SampleCode
- 恩智浦LPC2300芯片全部资源的源代码，在进行芯片开发时可以直接调用源代码。-NXP LPC2300 chip resources, source code, source code can be called directly. During chip development
zlg500S_51_UART
- ZLG522S的功能、硬件接口和ZLG500S相同，所有ZLG500S的例程ZLG522S均可使用 ZLG522S和ZLG500S的区别在于使用的读写芯片不同，ZLG522S使用的是NXP(原PHILIPS)的RC522 ZLG522S的内部密钥存储器只有4组，而ZLG500S有16组-ZLG522S functions, hardware interface and the same ZLG500S, all ZLG500S the ZLG522S routines can be us
NXP_arm_demo
- NXP的ARM各个外设参考源代码，可以立即运行起来，不需要任何修改，快速开发工程。希望对大家有所帮助。-NXP' s ARM reference source code for the various peripherals can be up and running immediately, without any changes, rapid development project. We want to help. Thanks
CAN
- NXP LPC2300 CAN模块源程序 有具体的工程，并且编译成功。-NXP is LPC2300 thecan module of the source program and compile successfully.
SD_read_write
- 在nxp lpc21xx 中使用SPI进行SD读写的测试程序, 同时还可以在PCF8833上显示-The use of SPI in the nxp lpc21xx reading and writing test procedures for SD, but also can display PCF8833
LPC23SPIsrc
- LPC23xx系列芯片SPI接口驱动示例程序，可发展成完整SPI接口驱动-NXP Corporation LPC23** series chip SPI interface driver sample programs can be developed into a complete SPI interface driver
CAN
- 基于NXP公司LPC2478芯片的CAN总线使用例程，需要的朋友下载-NXP LPC2478 chip company based on CAN bus using the routine, you need a friend to download
CAN
- NXP LPC1766 CAN通信配套例程（ZLG开发板自带源程序）-CAN for lpc1766
NXP-LPC9xx
- The BLINKY program is a very simple program that blinks the LED s on connected to Port 2 of the MCB900 or EPM900. When you can successfully build and run this program, you have used the entire toolset including:-The BLINKY program is a very simp
CAN
- NXP的LPC17XX系列单片机程序源码，CAN驱动程序，买开发板带的，后经过修改，并用在产品上。-It s programm for NXP LPC17XX, already be used on product.
can-rec-to-flash
- nxp LPC11系列从CAN总线接收数据然后送至flash-the nxp LPC11 family receive data from the CAN bus and then sent to the flash
NXP-LPC952
- NXP LPC952编程范例代码，大部分功能可以通过修改本例完成，简便快捷-it s an importand and easy to be understood code example,from which you can easily change to your own project
CAN
- nxp lpc1768的can总线驱动，从lpc1700移植过来，希望对大家有用-lpc1768 can bus of drivers from lpc1768 transplant hope to learn 1768 to help a friend
can
- CAN是控制器局域网络(Controller Area Network, CAN)的简称，是由研发和生产汽车电子产品著称的德国BOSCH公司开发了的，并最终成为国际标准（ISO11898）。是国际上应用最广泛的现场总线之一。 在北美和西欧，CAN总线协议已经成为汽车计算机控制系统和嵌入式工业控制局域网的标准总线，并且拥有以CAN为底层协议专为大型货车和重工机械车辆设计的J1939协议。- can.c: CAN module API file for NXP LPC23xx/24xx Fami
NXP
- NXP官方提供的例程，基于LPC177系列单片机，可直接用keil移植使用 ，大大缩减开发周期-NXP official routines, based on LPC177 series microcontroller, can be directly transplanted using keil use, greatly reduce the development cycle
NXP-LPC1788-CAN
- 基于LPC1788的CAN的驱动程序，以及CAN的测试程序。-Based on LPC1788 s CAN driver and CAN test program.
NXP-SC16IS752-DEMO
- 此代码是基于NXP公司的串口扩展芯片SC16IS752的驱动程序。此芯片可以用IIC或者SPI接口进行控制，两种程序都有，并且是基于C51的代码。简单易懂，方便进行移植。-This code is based on NXP s serial port expansion chip SC16IS752 driver. This chip can be used IIC or SPI interface control, both programs have, and is based on the
LPC_can_Bootloader
- 适用于LPC1788can总线下载程序，实现了flash编程，can总线协议制定(Applicable to LPC1788can bus download program, the realization of flash programming, can bus protocol formulation)
RC522 I2C STM32F103
- RC522 IIC驱动程序，可实现读卡和写卡功能，复旦卡或M1卡都可以，本人也试过读公交卡，可以读出序列号和卡类型。(RC522 IIC driver, can read card and write card function, Fudan card or M1 card can, I also tried to read the bus card, you can read the serial number and card type.)