搜索资源列表
SOURCE
- 一个UC/OS的实例程序，实现功能为串口简单的收发测试-A UC/OS examples of procedures to achieve the functions of a simple send and receive serial test
clockkeyrs232
- 基于ARM和proteus 采用定时器实现秒级定时 2个按键进行时间调整，一个采用中断方式、一个采用GPIO方式实现 显示1采用6个数码管（可带外部驱动器），使用动态扫描方式 显示2采用PROTEUS提供的RS232串口终端，用软件驱动串口进行显示 -Seconds using the timer class from time to time to achieve two key time to adjust to a disruption of the way the u
SerialDriverBasedonuCOS-II
- 基于ucos-II的串口驱动程序。内容包括ucos-II移植到C51系列单片机上的全部代码，带有中文注释。-Ucos-II based on the serial port driver. Include ucos-II ported to the C51 series of single-chip all the code, with Chinese Notes.
fouruart
- 基于ARM核的Ucos-ii 四串口通信，含PWM,CAN,RS232通信接受发送处理等代码- An sources based on arm and the operation system is ucos-ii .This source is used for the communcations between different boards by CAN or Rs232
UART0
- 一个ARM平台的串口驱动程序，其他平台的可以参照修改，在可以直接在lpc2478平台运行-ARM platform a serial driver, other platforms can refer to changes in the platform can be run directly on lpc2478
UART_384
- 定制协议的串口处理模块，用C语言写的可在ucos2上运用的驱动程序，可为写串口协议处理命令提供参考-Custom serial protocol processing module, using C language can be written on the use of ucos2 driver can write serial command protocol processing provide a reference
LPC2138key-lcd-uart
- LPC2138键盘显示密码串口代码包含键盘显示程序，LCD驱动程序，串口程序在UCOS2下的总程序-LPC2138 keyboard and display password serial code contains the keyboard display program, LCD driver, serial program under the general procedure UCOS2
UCOSLPC2378
- ucos2.86版本,用在LPC 2368上,包括串口等.-ucos2.86 version, used in the LPC 2368, including the serial port and so on.
uart_ucos
- 使用三星ARM9芯片S3C2410A，在uC/OS-II操作系统中实现串口的配置和数据传输-The use of Samsung ARM9 chips S3C2410A, in the uC/OS-II operating system to implement serial port configuration and data transfer
uCOSii_51_C51
- uCOSii_51_C51编译通过，P0口LED闪烁，串口返回任务号-uCOSii_51_C51 compile, P0 port LED flashes, serial number return to the task
uart0
- lPC2138串口使用,中断调度，标志组调度-UART0
AVR_uCOS-II
- 适用于AVR ATMega128 的uCOS-II，实现串口通信。-Apply to AVR ATMega128 of uCOS-II, to achieve serial communication.
lpc2368UARTdrives
- 过3天的测试，支持5个串口的UART驱动完成。这5个串口分别是：0软串口，1LPC2214UART0，2LPC2214UART1，3扩展的SC16C2550UART_A，4扩展的SC16C2550UART_B.rar-Over 3 days of testing to support five serial UART driver to complete. This five serial ports are: 0 soft serial, 1LPC2214UART0, 2LPC2214UART
C19_uCOS-II_SCIShineLED
- MC9S12DG128上ucosii的移植源码，还写了几个关于串口通信的任务。很好，很强大。欢迎下载-MC9S12DG128 on ucosii transplant source, but also wrote a number on the serial port communication tasks. Very good, very strong. Welcome to download
2410ucos
- ads1.2 A/D串口实验 mp3解码编码等等 在嵌入式的UCOSII系统上运行-ads1.2 A/D serial experiments mp3 decoding code, and so in the embedded systems running on UCOSII
UCOSII
- 基于飞凌2440-III开发板的UCOSII配1G的nand flash和7寸群创TFT，里面包括触摸、串口、LED\beep等功能-Feiling 2440-III-based development board UCOSII with 1G of nand flash and 7-inch Innolux TFT, which includes touch, serial, LED \ beep functions
ADC
- LPC2148驱动ADC ----- A/D模数转换 这个工作区 每个工程包含3个配置选项 ISP_iFlash_Hex - 生成.Hex格式的目标文件 JLINK_iflash - 通过JLINK来烧写内部Flash的配置 JLINIX_iram - 通过JLINK来在内部RAM中调试 工程名: LCD ----- LCD(包含了中断） MMC ----- MMC卡读写 Uart ----- 串口通讯 USBMouse ----- USB
LCD
- lpc2148的LCD驱动程序以及LCD的测试程序，包含串口通信以及外部中断-lpc2148 of LCD drivers and LCD testing procedures, including serial communication and external interrupt
web51_0508
- C51 串口源码,在OS操作系统下的数据网关,实现RS232转RJ45-C51串口程序
myucos2
- 串口界面控制的uCOS-II for Keil C51-Port interface control uCOS-II for Keil C51