搜索资源列表
ucosII_i2c
- 周立功公司的ARM开发板LPC2119环境下，I2C总线读写驱动程序。该代码可以重入。可直接使用无须修改。-the development board LPC2119 ARM environment, I2C bus driver to read and write. The code can go back to. Direct access needed to be changed.
ucos2 can总线通讯
- 编程实现MCP2510 的CAN 总线通讯；两个UP-NetARM3000 通过CAN 总线相连接。ARM 监视串行口，将接收到的字符发送 给另一个开发板并通过串口显示（计算机与开发板是通过超级终端通讯的）。即按PC 键盘通 过超级终端发送数据，开发板将接收到的数据通过CAN 总线转发，再另一个PC 的超级终 端上显示数据-Programming MCP2510 CAN bus communication; Two UP-NetARM3000 CAN bus link. ARM su
can_communication
- 2410开发板上can总线的通讯实验，使用ADS1.2集成开发环境-2410 development board can Bus communication experiments, the use of ADS1.2 Integrated Development Environment
canbuscommunication
- 此软件包为CAN总线通讯源代码，硬件平台为ARM2140开发板，操作系统使用uCOS。
can
- Can总线的控制协议，主要是用来实现以Can总线协议的方式进行的数据传输
S3C44B0X CAN总线通讯
- 按PC键盘通过超级终端发送数据，开发板将接收到的数据通过CAN总线转发，在另一个超级终端上显示数据来实现数据传输，源代码已经调试可用，希望能对大家有所帮助。-PC keyboard adopted by the Super Terminal send data, the board will receive the data transmitted through the CAN bus, in another super-terminal display the data to achieve
uCOSPuCGUI(FSMC)
- UCOS+GUI经本人精心修改能用在多种2.4-3.2屏上的GUI程序。ARM芯片为STM32103ZE使用FSMC总线。此程序为GUI的功能演示。实现了多种GUI功能。-UCOS+ GUI changes after I carefully screen can be used in a variety of 2.4-3.2 on the GUI program. ARM chips used for the STM32103ZE FSMC bus. This program function
AT91SAM7A3(CAN_CAN)
- 针对arm开发板开发的can总线应用程序-can
Exp5canbusexam
- 这是三星公司arm9 2410编写的can总线驱动程序，采用codewarrior编写-This is Samsung' s prepared arm9 2410 bus driver can use to prepare codewarrior
can
- 基于ARM9 S3C2410下ucos-II的CAN总线驱动函数，需要正确设置ADS1.2下的配置否则无法编译通过，配置ADS1.2的文章网上有很多，参考下就可以了。-ARM9 S3C2410 based ucos-II under the CAN bus driver function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible to compile through
CAN_test
- stm32 cortex-m3 can总线程序-stm32 cortex-m3 can bus program
IAR
- 基于uc/os的STM32F107的开发 CAN总线、串口发指令，电机速度闭环程序-Based uc/os for the development of STM32F107 CAN bus, serial port send command, motor speed closed-loop process
CAN
- CAN总线驱动程序，用于ucosii操作系统或keil平台，-CAN bus communication driver，for ucosii or keil complier,
CAN
- 此程序是ARM7 CortexM3内核CAN总线的源代码。希望对同仁们有所帮助，相互学习。-This program is ARM7 CortexM3 kernel source code CAN bus. Want to help colleagues learn from each other.
1.STM32-CAN
- 1.STM32处理器下的IAR开发环境下，CAN总线通信实例程序-IAR development environment 1.STM32 processor, CAN bus communication program
template_11-26
- 这是一个基于Stm32并集合实时操作系统ucos的程序，包含了FATFS文件系统，SD卡驱动程序，24L01驱动程序，CAN总线驱动程序，LCD驱动程序，VS1003音频解码芯片驱动程序，只要稍作修改就可适配自己的硬件板-This is based on a collection of real-time operating system and Stm32 ucos program, including the FATFS file system, SD card driver, 24L01
ucoscan
- 采用UCOS操作系统实现在界面上操作发送按钮实现CANH端一定和CANH端的通信（CAN总线通信）-UCOS operating system implementation using the Send button operation to achieve certain ends and CANH CANH terminating communication (CAN bus communication) at the interface
LCD_New2014
- 对繁易智能液晶屏进行控制，主控芯片Freescale 9212XEP100,基于RS232的modbus总线协议,在ucos-ii下运行，将接收的CAN信号转换成液晶屏的显示量。-a control program for FLEXM intelligent LCD system, the control core is 9S12XEP100 freescale. this program run at ucos-ii OS whose aim is to translate can mess
uCOS_CAN_SCI
- uCOS在mc9s08dz60上实现can总线有串口总线的通信-UCOS in mc9s08dz60 can be achieved on the bus bus communication bus