搜索资源列表
TC3_ucos2_ucgui2
- 在纯DOS下运行的TurboC3_ucos2_ucgui bug改进版本，直接解压到D:\\根目录下，运行D:\\myworks\\tc\\bin\\tc.exe，打开project，打开ucgui目录下的ucgui.prj,而后按Ctrl+F9编译并运行！-in pure running under DOS TurboC3_ucos2_ucgui bug improved version directly to extract D : \\ root directory, typing D :
ucos2.61
- 嵌入式操作系统源代码ucos2.61，非常稳定的源代码，在网站上显示没有一点bug。-Embedded operating system source code ucos2.61, very stable source code, on the website showed that there was no point bug.
UCOSII2.83
- ucos2 2.83最新版,增加了os_tmr.c,定时器管理程序,别的修改了一些小BUG,任务管理到254个,很不错,使用的时候仔细看以下说明-ucos2 latest version 2.83, an increase of os_tmr.c, timer management procedures, revised some other small BUG, task management to 254, is pretty good, the use of carefully read
Ucos-Ii-v261-Microblaze-Nohauupdated-fixed05-2006.
- uC/OS-II Notes from Nohau Corporation The code associated with this readme.txt file is provided \"as is\". The code was written with the intention of creating a functional RTOS demo for the Nohau evaluation boards that can run a MicroBlaze
HELLOCN_SRCCODE
- 自己动手写操作系统源代码,不可多得的代码，修改其中一些bug，使得代码更完善
lwip
- 最新的lwip 1.3.0版本在ucos平台上的移植，由于lwip 1.3.0版本相比之前版本在接口上做了改动，必须修改相应的驱动，否则会造成一些不易发现的bug-The latest version of lwip 1.3.0 uCOS platform transplantation, as compared to prior versions lwip 1.3.0 version done in the interface change, the driver must be revise
STM32F4_uCOSII
- STM32F4系列移植ucos, FPU可用, 有一个小bug未修复.-STM32F4 Series ucos-ii, FPU is available, there is a small bug is not fixed.
TC-ucos-philos-comment-in-detail
- TC-ucos-philos-详细注释.rar 用TC编译ucos并在图像化界面下演示哲学家就餐问题，采用信号量机制，程序有BUG，不能顺利运行，但是我写了很多注释，有兴趣的朋友可以继续做下去，我的邮箱xuxi009@163.com可与我联系。注意图形界面驱动的路径要和源文件中的相同否则无法显示图形界面，相信用过TC的图形界面的明白，呵呵。-TC-ucos-philos-detailed notes. Rar uCOS compiled by TC and the image of i
2440_ltm09c012
- 基于零点电子dvk2440开发板,用于测试ltm09c012液晶屏的程序,如有bug请联系mikenoodle@163.com-Based on zero dvk2440 Electronics development board for testing LCD ltm09c012 procedures, if any bug please contact mikenoodle@163.com
Micrium_ucos_msp4305438_port_v2.87
- ucos Ver 2.87 最新移植到TI的msp4305438低功耗msp430处理器.含相应文档资料.测试过,稳定无BUG. -UCOS2 Version 2.87 port to MSP4305438 . stable version.
UCGUIFontTool_V0.1
- 是基于ucos+ucgui嵌入式系统开发必备工具，解决UCGUIFontTool导出大字体时点阵为空白的Bug：原程序中导出数据时“像素值的判断”存在bug!-Ucos+ ucgui based embedded system development tools necessary to solve UCGUIFontTool export large font matrix blank Bug: When you export data in the original program &quo
uc_os-ii-onC51_lcd_
- uc os-ii在c51下的lcd项目源代码,但是在学习过程中，发现了一些bug，但仍不失为一个入门的好代码-uc os-ii under the lcd in c51 project source code, but in the learning process, found some bug, it is still a good entry code
TCP_Test
- LPC1700 用周立功的开发板上的TCPIP改的。修正了一些BUG。但突然断网没有解决，可用硬件方式，网口灯灭强关TCP，就可以了。-With the development of LPC1700 ZhouLiGong TCPIP change on the board. Fixed some BUG. But suddenly broken network not solve, usable hardware way, WangKou lamp strong close TCP, it ca
my2440ucosii
- UCOS-II在mini2440上的移植，采用v2.9内核，修复官网上移植代码的一个bug（软件中断可能导致内存溢出)-port the newest version of ucos-ii to mini2440,and fix a bug which could cause memory overflow in soft interrupt
TucoosW78E588h
- 这是我从别的网站下载的UC/OS移植到单片机SCM上的源代码码，相比较别的上传的，我的绝对好用，没有任何BUG 已通过测试。 -This is my source code from another site to download UC/OS ported to the microcontroller SCM, compared to upload, I absolutely easy to use, there is no bug has been tested.
uCOS-III-IAR-MDK
- 解决ucos3下的FPU问题，编译没有错误-solved the FPU Problam in UCOS3，no build bug
os_core
- 1.改进的uC-OS的内核程序段 2.正对UC-OSIII的bug作者做了修改， 3.减小单片机损耗-1. Improved kernel section of uC-OS 2. Positive for UC-OSIII the bug author made changes 3. Reduce loss microcontroller
uCGUI3.98_完整版本
- ucgui 3.98版源碼; 主要修改如下： 1、增加uCGUI3.90的AntiAlias、JPEG、MemDev、MultiLayer到GUI目录； 2、GUI目录下，新建VNC目录，增加GUI_ProcessVNC.c文件，此文件为空，为与原工程保持一致性，另新建Touch目录； 3、Simulation目录下增加BASETSD.H头文件，新建GUISim目录，把SIM.h、SIM_X.c、GUI_SIM_NoWin32.h、GUI_SIM_Win32.h、GUISim.lib添