搜索资源列表
-
2下载：
（Root Raised Cosine Filter）根升余弦滤波器的MATLAB代码,Root Raised Cosine Filter MATLAB code
-
-
12下载：
本程序用于完成BPSK、QPSK、pi/4QPSK、OQPSK、8PSK、16QAM、32QAM、64QAM和128QAM的调制仿真。并可任意扩展到MPSK和MQAM。程序分成四个部分，fir.m对基带码元序列进行脉冲成型，可选矩形脉冲，升余弦脉冲和平方根升余弦脉冲； modal.m 为主程序，完成岁各种信号的基带星座图映射、脉冲成型和调制；pi4QPSK.m 为pi/4QPSK信号的星座图映射程序；test1.m给出一个简单的频谱显示测试。,This procedure for the com
-
-
1下载：
二元CPFSK的 不开根升余弦成型函数调制及解调,
解调法采用了8倍采样的最终点解调.-Binary CPFSK not open root raised cosine shaping function of modulation and demodulation, the demodulation method using 8 times the final sampling point of demodulation.
-
-
0下载：
根升余弦函数，主要用在调制时的成型时使用-Root raised cosine function, mainly used in modulation used at the time of molding
-
-
0下载：
有关MPSK调制，传输模型。成型脉冲分为矩形，升余弦脉冲，平方根升余弦脉冲。M的值为2，4和8.所加噪声是高斯白噪声。-Of the MPSK modulation, transmission model. Pulse shape is divided into rectangular, raised cosine pulse, the square root raised cosine pulse. The value of M for 2,4 and 8. The increase in n
-
-
1下载：
本程序用于完成BPSK、QPSK、8PSK的调制仿真。并可任意扩展到MPSK和MQAM。程序分成三个部分：phase.m对基带码元序列进行脉冲成型，可选矩形脉冲，升余弦脉冲和平方根升余弦脉冲； model.m 为主程序，完成各种信号的基带星座图映射、脉冲成型和调制； command.m给出一个简单的频谱显示测试。-This procedure for the completion of BPSK, QPSK, 8PSK modulation simulation. Arbitrary and m
-
-
0下载：
平方根升余弦脉冲 平方根升余弦脉冲 平方根升余弦脉冲 平方根升余弦脉冲-Square Root Raised Cosine Square Root Raised Cosine pulse Pulse Pulse square root raised cosine square root raised cosine square root raised cosine pulse Pulse Pulse square root raised cosine square root raised cos
-
-
0下载：
This the PAPR simulator for SC-FDMA by using the Raised-cosine filter or Root raised-cosine filter under different rolloffFactor. -This is the PAPR simulator for SC-FDMA by using the Raised-cosine filter or Root raised-cosine filter under different r
-
-
0下载：
仿真滚降系数为0.22的平方根升余弦滤波器.m-Simulation of roll-off factor of 0.22 square root raised cosine filter. M
-
-
1下载：
matlab实现矩形脉冲和根升余弦脉冲的QPSK调制功率谱密度及不同信噪比信道下的星座图，直接运行main函数即可-Plot the power density spectrum of the transmitted signal (e.g., with the matlab function psd) with different pulse shapes. How is it affected if a root raised cosine pulse is chosen instead o
-
-
0下载：
平方根升余弦脉冲实例。两个SQRC滤波器的级联组合就成为一个零ISI的滤波器。此程序用于获得平方根升余弦脉冲。-Square root raised cosine pulse instance. Cascade combination of the two SQRC filters to filter a zero ISI. This procedure used to obtain the square root raised cosine pulse.
-
-
0下载：
Pulse shaping code for Matlab. This module use a square root raised cosine (SRRC) pulse.
-
-
0下载：
Root raised cosine filter implementation in matlab, with graphs of impulse and frequency response.
-
-
0下载：
一组取值为+/-1的随机序列，每两个数据之间插入3个0，然后将序列通过一个设计好的根升余弦滤波器，并用周期图法和Welch法分别绘制信号的功率谱。再次通过根升余弦滤波器后用stem函数绘图。-A set of values is+ /-1 random sequence inserted between every two data 3 0, then the sequence through a root raised cosine filter designed,
-
-
1下载：
编写一个含QAM传输的发送和接收模块
1)分别采用复基带仿真和实带通仿真两种形式
a) 实带通仿真时, 载波频率为符号率的4倍
b)发端采用滚降系数0.5的根号升余弦滤波器
2)画出Eb/N0=15dB时的接收波形(收滤波前),取100个采样
3)画出发端输出的眼图和收端过匹配滤波后的眼图(画眼图时不加噪声)
统计误符号率和误比特率与Eb/N0的关系,画出曲线, 与理论计算的曲线相对比
-Prepare to send of one with QAM transmis
-
-
0下载：
用matlab编写了一个，信源产生经过BPSK调制以及根号升余弦滤波器后再加上载波最后将波形图输出的程序-Using matlab prepared a source after BPSK modulation, as well as the square root raised cosine filter and then with the carrier waveform graph output of the program
-
-
0下载：
代码实现了一个根升余弦成型滤波器，2PAM信号通过此成型滤波器，并且匹配接收，画出了发送和接收波形，验证了代码的正确性。-The code designs a root raised cosine filter,2PAM signal transmitted through the filter and matched using the same filter, I plot the transmitted signal and received signal to verify the co
-
-
0下载：
对平方根升余弦滤波器进行归一化处理，使得输出的信号更接近输入信号。-Normalized the square root raised cosine filter
-
-
0下载：
Using the attached Matlab/Octave scr ipt, one can plot the time domain and frequency domain representations of the raised cosine filters for different values of .
-
-
0下载：
square root raised cosine impulse response
-
