搜索资源列表
Fine-gainedFlashAccess
- * 一、功能: Fine-gained Flash Access驱动演示代码. * 二、运行前提: 本范例需要硬件开发板的支持, * 要求硬件开发板具备名为”ext_flash”的CFI Flash或EPCS Flash模块
linuxmtd
- Linux MTD介绍： MTD(memory technology device内存技术设备)是用于访问memory设备（ROM、flash）的Linux的子系 统。MTD的主要目的是为了使新的memory设备的驱动更加简单，为此它在硬件和上层之间提供了一个 抽象的接口。MTD的所有源代码在/drivers/mtd子目录下。我将CFI接口的MTD设备分为四层（从设备节 点直到底层硬件驱动），这四层从上到下依次是：设备节点、MTD设备层、MTD原始设备层和硬件驱 动层。
CFIFlash.rar
- 完全支持CFI协议的Flash驱动，支持多种Flash芯片，换Flash不用修改代码,Fully supports the CFI' s Flash-driven protocol to support a wide range of Flash chips, do not modify the code for Flash
jesd68-01
- Update Jedec Specification Common Flash Interface (CFI) JESD68.01 (Minor Revision to JESD68, September 1999) -Update Jedec SpecificationCommon Flash Interface (CFI) JESD68.01 (Minor Revision to JESD68, September 1999)
AP-003-CFI-E
- Update Specification Common Flash Interface (CFI)-Update SpecificationCommon Flash Interface (CFI)
cfi_r20
- Common Flash Interface (CFI) Rre. 2.0-Common Flash Interface (CFI) Rre. 2.0
29220404
- Common Flash Interface (CFI) and Command Sets from Intel-Common Flash Interface (CFI) and Command Setsfrom Intel
CFI
- Common Flash Interface BIN Parser-Dump CFI binary data from any flash memory chip and use this MS Windows application to interpret this file and extract useful information about the flash memory chip: Primary OEM Command Set, Address for Primary Exte
cfi
- Flash芯片的CFI驱动c语言源代码,对自升级的系统有帮助。-Flash chips CFI driver c language source code, since the upgrade of the system has to help.
M29W128GHL
- Flash Memory 依據標準CFI CMD做Erase/Program過程的參考碼-Flash Memory based on the standard CFI CMD to do Erase/Program process reference code
nios_shi
- 由nios ii实现的，用cfi flash与SDRAM共同实现的电子数字时钟，基于sopc的嵌入式代码，所用软件都是9.0版本的，包括quartus ii9.0 和nios ii9.0-Achieved by the nios ii, together with the cfi flash with SDRAM to achieve the electronic digital clock, based on sopc embedded code, the software is versio
cfi_ctrl_latest.tar
- 很好的 wishbone转CFI FLASH接口的源码，在INTERL的FLASH上已经调试通过-CFI FLASH CORE
jtag
- C# 开发jtag烧写arm CFI外置flash程序。 可成功烧入通过FPGA验证ARM的外置flash芯片。支持8位flash. -C# for programming CFI flash. supported 8 bit CFI flash.
lart
- MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
pmcmsp-flash
- Mapping of a custom board with both AMD CFI and JEDEC flash in partitions. Config with both CFI and JEDEC device support.- Mapping of a custom board with both AMD CFI and JEDEC flash in partitions. Config with both CFI and JEDEC device support.
pmcmsp-flash
- Mapping of a custom board with both AMD CFI and JEDEC flash in partitions. Config with both CFI and JEDEC device support for Linux v2.13.6.
lart
- MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
openocd-0.8.0
- OpenOCD provides on-chip programming and debugging support with a layered architecture of JTAG interface and TAP support including: - (X)SVF playback to faciliate automated boundary scan and FPGA/CPLD programming - debug target support (
pmcmsp-flash
- Mapping of a custom board with both AMD CFI and JEDEC flash in partitions. Config with both CFI and JEDEC device support.
cfi_ctrl_latest.tar
- bpi cfi flash control 转自opensource(bpi flash control from openscr)