搜索资源列表
vhdl_ad0809_arm
- 本程序是用VHDL语言写的，包括AD0809，双口RAM等程序。已经调试过-this program is written in VHDL, including the AD0809, dual-port RAM, and other procedures. Debugging has been too
0809conventorvhdl
- 1.AD0809转换器的vhdl实现 2.用状态机来实现不同状态的动态切换，思路明晰简单实现。 3.内含注释，易于修改和理解 4.对数码管的动态扫描,显示 -1.AD0809 converters to achieve the two vhdl. Using the state machine to achieve the different states of dynamic switching thinking, clarity simple to achieve. 3. N
AD0809
- 由VHDL 语言实现的AD0809用的是KEIL环境已经得到验证
8.4ADC0809
- FPGA中用VHDL编写的AD0809的转换接口电路及程序源码-FPGA using VHDL prepared AD0809 conversion interface circuit and program source code
AD0809
- 基于FPGA的AD/DA控制VHDL程序-Based on the FPGA AD/DA control VHDL program
fifo
- 此程序为存储器常用的FIFO（先入先出），程序中没有指明位宽，这样更适合于初学者进行套用-This process commonly used for the memory FIFO (FIFO), the procedure is not specified bit, so more suitable for beginners to apply
sys_0809
- 用VHDL语言描述AD0809芯片，实现AD0809的功能-VHDL language used to describe chip AD0809, AD0809 to achieve the function of
sys_0820
- 使用VHDL语言描述AD0809芯片功能，实现芯片的硬件描述-The use of VHDL language descr iption AD0809 chip function, the realization of chip hardware descr iption
ADC
- 对AD0809进行操作，将AD转换后的结果直接对对8个发光二极管进行赋值，程序有详细的注释！-Operation of the AD0809 will be the result of AD conversion directly against eight light-emitting diodes for assignment, procedures detailed notes!
ad0809
- verilog_ad0809 cpld control
ad0809
- 本程序基于ad0809，通过数码管显示0V--+5V电压。-The program is based on ad0809, via digital display 0V-+5 V voltage.
ad0809
- 对ad0809的控制代码- ad0809control
ADC809_verilog
- 使用VHDL控制AD0809的源代码，附有仿真图-Control the AD0809 using the VHDL source code, with a simulation diagram
ad0809vhdl
- 用vhdl编写的ad0809，不过所实现的不能直接输入模拟信号，而是只能是整数信号-Prepared using vhdl ad0809, but can not be directly implemented by the input analog signal, but can only be an integer signal
ad0809verilog
- 这是用Verilog编写的ad0809，和之前的vhdl功能相似，不过开发环境部一样-It is written in Verilog ad0809, and before the vhdl function similar, but the Ministry of Environment as the development
AD0809-VHDL
- ADC0809模数转换器 VHDL 代码，用数码管显示值-ADC0809 ADC VHDL code, with digital display
AD0809
- AD0809的采样控制设计，经过试验成功了得-AD0809 sampling control design
ad08091
- AD0809的VHDL语言编程，用于FPGA硬件开发。-The AD0809 VHDL language programming，For FPGA hardware development.
sbq
- 基于fpga和传统示波器工作方式的vhdl程序，通过ad0809采样信号（可兼容tlc5510）再经由8位da转换输出，同时输出外触发锯齿波，建议使用感性小的示波器探头，否则锯齿波低频时会出现失真-Fpga-based and traditional ways of working oscilloscope vhdl procedures, through ad0809 sampling signal (compatible tlc5510) and then through eight da
VHDL-basedAD0809
- 使用VHDL语言编写的AD0809驱动程序，输入0 ~5V的电压，输出8位二进制代码，0V对应“00000000”，5V对应“11111111”。-Using VHDL language AD0809 driver, enter 0 ~ Voltage of 5V, output 8-bit binary code, 0V corresponds to 00000000 , 5V corresponds to 11111111.