资源列表
dco
- 使用MATLAB建模实现DCO-OFDM(Implementing DCO-OFDM using MATLAB modeling)
I2C
- 基于STM32的标准软件模拟I2C接口程序，只要修改引脚定义及延时接口程序即可使用，改程序已在工业产品上大量应用，十分的稳定可靠并且代码编写规范。(The standard software based on STM32 simulates the I2C interface program. It can be used only by modifying the pin definition and delay interface program. The modified program
I2C
- 模拟I2C通信，STM32，优化修改可用(Analog I2C communication, STM32)
PWM输入模式捕捉4路PWM的周期和占空比(1)
- 使用STM32开发板实现在PWM输入模式捕捉4路PWM的周期和占空比，从而对电机进行控制(Using STM32 development board to capture the cycle and duty cycle of four-way PWM in PWM input mode and control the motor)
Eurotherm_ER-PL_ER-PLX-中文说明书
- 欧陆ER-PL_ER-PLX说明书 需要的下载一个。欧陆ER(EUROTHERM ER for everybody .thanks.)
pll
- 自己用matlab编写的平方锁相环的仿真，对锁相环研究的同学具有很好的参考价值(The simulation of PLL written by myself in MATLAB is of great reference value to the students who study PLL.)
SHT21
- SHT21实现源代码，可以成功，已经验证过了的。(SHT21 to achieve source code, you can succeed.)
binama
- 里面包括QPSK编码，8QAM编码下的多种求解信噪比和误码率的曲线(Can plot the signal-to-noise ratio and bit error rate under 8QAM)
OFDM
- 根据流程图搭建并且仿真OFDM系统，画出输入输出的信号的星座图，计算误码率，改变抽头系数……(According to the flow chart, the OFDM system is built and simulated. The constellation diagram of the input and output signals is drawn, the bit error rate is calculated, and the tap coefficient is chang
PIC-Modbus-RTU
- pic miceoc0ntroller dspic micro
TIM—全彩LED灯
- 使用STM32f103开发板，全彩灯实验，色彩可通过延时来改变(Use STM32f103 development board, full color lantern experiment, color can be changed by delay.)
PhpSIP.class
- 基于开源的PHPSIP类进行扩充改写，实现了php的SIP 客户端的基础功能，重点是扩展支持DTMF，同时支持SIPINFO模式和rfc2833协议；说起来，这个功能并不复杂，但基于对协议的理解（网上相关资料不完整），确实化了我很多时间！因为PHPSIP本身是开源的，所以我还是把自己的代码开源出来！(Extended rewriting of PHPSIP class based on open source implements the basic functions of SIP clien