资源列表
SHT30
- 读取SHT30模块中温湿度数据,并发送至OLED显示(Read the temperature and humidity data in the SHT30 module and send it to the OLED display.)
3.Open source Letter Shell
- 基于STM32WB55的shell命令行范例(Shell command-line example based on STM32WB55)
STM32F106CT稳压电源
- 完全调试成功,自带校准功能。精度可以到小数位后三位。(Complete debugging is successful, with calibration function.)
input_control
- 树莓派3b+,通过vnc远程登录后,通过控制台input发送命令控制树莓派程序(Raspberry dispatch 3b +, after remote login through vnc, send commands through console input to control raspberry dispatch program)
获取毫米波雷达的can数据 (直接获取版本的)
- 利用STM32单片机对毫米波雷达数据进行解析(Analysis of Millimeter Wave Radar Data Using STM32 Single Chip Microcomputer)
STM32_pfc8591
- 根据51单片机编写的8位adc芯片(pfc8591)的驱动程序移植到stm32f103里面并在串口显示(The driver of 8-bit ADC chip (pfc8591) compiled by 51 single chip computer is transplanted into STM32F103 and displayed in serial port.)
交通灯
- 1.设计一个十字路口交通信号灯控制器,其要求如下: 设南北方向的红、黄、绿灯分别为r,y,g;东西方向的红、黄、绿灯分别为R,Y,G,满足图1 的工作流程并且可以并行工作:g(R)→r(G),黄灯用于提示绿灯变为红灯或者绿灯变为红灯。(1. Designing a traffic light controller for intersections, the requirements are as follows: Let the red, yellow and green lights in
T12白光控制器
- STC15F204EA单片机旋转编码器版白光T12控制器代码7.14版
移远NB模块BC35驱动
- 移远NB模块驱动程序,里面包含BC35联网和数据发送。(Remote NB module driver, which contains BC35 networking and data transmission.)
PID加热源程序f407
- 加热程序,使用了PID,具体内容大家尝试以后比价清楚明了(Heating procedure, using PID, specific content after you try to price clearly)
SC7A20加速度传感器驱动
- SC7A20 acceleration sensor driver, including application documentation, with register instructions.
Zynq Book中文翻译稿电子版
- Zynq Book英文翻译稿详细电子版(中文电子版)(Zynq Book Chinese Translation Detailed Electronic Edition)