资源列表
msp_key_12864
- 运放参数测试仪的MSP430程序，由红外按键，12864液晶等构成-Op amp parameters tester MSP430 procedures, by the infrared keys, 12864, etc. constitute
80X32-dot-matrix-
- 32x80双色点阵屏，含有简单的汉字显示程序与FFT音乐频谱等程序-32x80 dot matrix color screen, with a simple character display program with FFT spectrum of music and other procedures
gai3
- ad7705的51程序，可以用来驱动ad7705，非常方便-ad7705 51 procedures can be used to drive ad7705, very convenient
ATT7026
- ATT7026读写程序(原理图-可以直接做成三相电表)-ATT7026 literacy program (schematics- can be made directly to three-phase meters)
TEST-ADC
- 在TFT-LCD模块上显示一些提示信息后每隔250ms读取一次ADC通道0的值，并显示ADC的数字量和转换后的模拟值，LED闪烁提示程序运行-In the TFT-LCD module display some message read once after every 250ms ADC channel 0 value, and display the ADC digital and analog value after conversion, LED flashing prompt run
STM32-RTC
- 设置STM32的内部实时时钟RTC，利用2.8寸的TFT—LCD模块来显示日期和时间，实现一个简易的时钟！-Set STM32' s internal real-time clock RTC, using the 2.8-inch TFT-LCD module to display the date and time, to achieve a simple clock!
STM32F103-DMA
- 设置STM32的DMA，利用它来实现串口数据传送，并在TFT-LCD模块上显示当前的传送进度，打开串口调试工具，按住轻触开关则可看到界面的信息-Set the STM32 DMA, use it to serial data transmission, and in the TFT-LCD module displays the current transfer progress, open the serial port debugging tool, hold down the touch
key_tigaopian
- 三星单片机 S3F84U8使用IAR编译器_按键识别-提高篇-Samsung SCM S3F84U8 using the IAR compiler _ identification keys- to improve articles
the-ADC-and-DMA-of-stm32f407
- stm32f407之ADC与DMA,网转一个介绍M407的ADC和DMA的资料,供有用之人参考.-stm32f407 the ADC and DMA, network transfer a presentation of the ADC and DMA M407 information useful person for reference.
Assembly_IAR
- MSP430F563x, MSP430F663x 在IAR平台上的所有汇编例程-MSP430F563x, MSP430F663x the IAR assembler routines for all platforms
5-integrated-op-amp-parameter-tester
- 基于AVR编写的集成运放参数测试仪项目，测量精度高，包括软件和硬件-Prepared based on the AVR integrated operational amplifier parameter tester project, high accuracy, including software and hardware
SD-card
- SD卡读写。在SD卡任意指定扇区实现数据写入和读出。将读出数据在12864液晶上显示，按键实现上查下查。 -SD card reader. Any given sector of the SD card write and read data. The read data is displayed on the LCD in the 12864, key realization check under investigation.