资源列表
stepmotor
- 步进电机程序，基于AT89C51 的步进 电机控制！-Stepper motor program, based on AT89C51 stepper motor control!
uartdemo
- 本段程序的功能是将它接收到的信息传递并且在LED阵列中显示出来。-This section features the program is to disseminate the message it receives and displayed in the LED array.
MT8888
- MT8888电话拨号芯片读写程序，拨号程序！-MT8888
SCCBdriver
- ov6620摄像头SCCB总线接口驱动程序，包含.h和.c文件。此程序在codewarrior下编译通过。在飞思卡尔MC9S12XS128平台上完成对ov6620的寄存器读写操作。系统时钟频率48Hz-ov6620 camera driver SCCB bus interface, including. h and. c files. This program codewarrior compile. Freescale MC9S12XS128 platform in the completio
Dream
- 这是我自己曾经比赛用过的一个简单的智能小车程序，光电检测的-This is my own race have used smart car a simple process, photoelectric detection
MSP430FR57xx_uscia0_spi_10
- Descr iption: SPI slave talks to SPI master using 3-wire mode. Data received from master is echoed back. ACLK = 32.768kHz, MCLK = SMCLK = DCO ~ 1MHz Note: Ensure slave is powered up before master to prevent delays due to slave init.-Descr i
scannig-light
- This example gives a functional emulation of a scanning LED array. Here a row of LEDs will light in turn one after the other. The circuit uses the PA port PA0~PA7, each bit of which is connected via a 240Ω series resistor to an LED.-This example
1602LCD
- 单片机外界LCD显示屏，1602LCD驱动程序，-1602LCD driver
ADC0809-
- 这个是在单片机开发版上基于C环境的动态显示程序-This is based on the microcontroller development version C environment dynamic display program
beep
- 由单片机控制蜂鸣器，让蜂鸣器响起歌：八月桂花香。-Controlled by the microcontroller buzzer, the buzzer sounded Song: 八月桂花香.
The-timer-interrupt-seconds-count
- 定时器中断秒计数 效果： 数码管做精确的秒计数00--The timer interrupt seconds count effect: digital tube accurate seconds count 00-99
EMWIN_NEEDLE
- EMWIN的时钟时针旋转界面，实现时针的旋转！-EMWIN clock clockwise interface, realize clockwise rotation!