资源列表
单片机控制打印机
- 能够学会用单片机控制打印，还能深入了解单片机内部机理。-to learn how to use the SCM control print, but also in-depth understanding of the internal mechanism of SCM.
AD
- AVR单片机做的AD转换,对初学AD转换的新手非常好用.
atmega128
- *PC和ATMEGA128通信，ATMEGA以轮循方式发送，中断方式接受*-* PC and ATmega128 communications, ATMEGA sent to Round Robin, interrupted to receive*
eeprom
- 基于ATMEGA88开发内部EEPROM的源代码模块-ATMEGA88 development based on the internal EEPROM of the source code modules
adc0809
- ad0809驱动程序。 用到的管脚 : P1.0--P1.6；P0；P2.0--P2.4 *开始需初始化: _ADC_0809_init() *入口 : 选通的通道 unsigned char _ADC_0809_innum *出口 : 原始值-ad0809 driver
tlv5614
- TLV5614 为4通道12位DA转换芯片，该程序应用单片机ATMEGA8与TLV5614实现4通道模拟量0-5V信号的输出-TLV5614 4-channel 12-bit DA converter chip microcomputer, the program ATMEGA8 and TLV5614 to achieve four-channel analog output 0-5V signal
key_driver
- LM3S811 16键键盘驱动 占用GPIOB 0～8-LM3S811。Driver for 16-key keyboard
51bitbang
- Routine for Serial BitBang using P3.1 as Tx and P3.0 as Rx. Target processor 8051. Compiler: SD-Routine for Serial BitBang using P3.1 as Tx and P3.0 as Rx. Target processor 8051. Compiler: SDCC
Sensor_temperatura
- Program that convert the voltage in temperature, uses PIC16F877a and works with termopas.
shizhong
- 单片机89S51控制6个数码管显示时，分，秒。其中，位码通过P0口的P0^0-P0^5 控制，段码通过74LS164的串入并出的移位寄存器来送出。-6 MCU 89S51 control digital display hours, minutes and seconds. Among them, the bit code through the P0 port P0 ^ 0-P0 ^ 5 control, the string section of code into and through
PIC16F690readGPS
- PIC16F690对GPS模块进行数据解析，GPS为GPRMC格式，通信速率9600bit/s-PIC16F690 data analysis of the GPS module, GPS for the GPRMC format, communication rate 9600bit/s
9313
- 基于51单片机的数字电位器x9313控制源代码-Based on 51 single-chip digital potentiometer control source code