资源列表
sinx_2
- 在DSP2407上的一个求sinx的函数实现
addr
- M4A564/32 CPLD VHDLＡ程序，调试可用,51扩展.
RAM.ZIP
- VHDL CODE FOR RAM AND ROM
ADI
- Heat Transfer ADI(Alternating direction implicit method) for Parabolic Partial Differential Equations.
paomadeng
- 使用51单片机编写的跑马灯程序，顺序点亮8个发光二极管，并闪烁-Marquee prepared using 51 single-chip program, the order of 8 LED lights, and flashing
electronic-clock
- 这是一个简单的51单片机编写的程序，可实现时间的准确显示-This is a simple program written in the 51 SCM can achieve an accurate display of time
bujingC
- 简单设计步进电机的驱动C程序！方便调试和再添加学习！-Simple design stepper motor drive C program! Easy to debug and add learning!
Timer-control-traffic-lights
- 东西向绿灯亮 5s 后，黄灯闪烁，闪烁5 次亮红灯， 红灯亮后，南北向由红灯变成绿灯，5s 后南北向黄灯闪烁， 闪烁5 次后亮红灯，东西向绿灯亮，如此往复-East-west green light 5s after the flashing yellow light flashes 5 times red. Red light, north and south from the red to green, 5s after the north and south to the fl
MCU-button-interface-program
- 这是一个51单片机按键接口的源程序，是用C程序写的，是我自己写的，可以在51单片机上成功运行。-This is a source of the 51 microcontroller keys interface is written in C program, I wrote it myself, you can run successfully on 51 SCM.
2
- 程序功能为基于10位的高精度DAC数模转换器，实现频率比较高的周期周期性信号输出，分别实现锯齿波和三角波输出，通过控制插入的软件延时可以达到调节输出信号频率的目的。-Program function is based on 10-bit precision DAC digital-to-analog converter, to achieve a relatively high frequency periodic periodic signal output, respectively, to
display
- ds1302做的时钟，开机动画程序，显示用共阳6位8段数码管-ds1302 clock to do, boot animation program
ad9984
- 做项目用单片机配置的ad9984代码，此部分是用芯片的VGA输入端，将VGA信号转换为24bitRGB给后级使用，因为涉及项目只贴出ad9984配置部分。- Do projects MCU configuration ad9984 code, this part is the VGA input of the chip, the VGA signal into 24bitRGB to use after the class, because it involves only poste