资源列表
ex4-1
- LED的控制,应用AT89S51芯片的P1口输出跑马灯,使得LED0,1,2,3,4,5,6,7依次闪烁-LED control, application AT89S51 chip output port P1 of the Marquee, the LED0, 1,2,3,4,5,6,7 followed by scintillation
random_bit_generator
- generation de message binaire
df
- 点阵显示程序 看一下就可以明白点阵的原理 点阵是二极管的集合-Dot-matrix display program look and you' ll understand the principle of dot matrix is a set of diode
bcdk
- 射频开发模块,用于单片机的开发和射频卡的控制程序-RF development module for SCM development control procedures and RF card
dsp1-tms320f2812
- 控制XF引脚周期性变化:循环对XF位置1和清0,用示波器可以在XF脚检测到电平高低周期性变化-XF pin periodic change control: cycle 1 and the location of the XF to 0, with an oscilloscope can be detected in the XF pin low level periodic variation
dsp5-tms320f2812
- 闪灯程序 LED灯由LED8~LED15从左到右次每隔一秒亮一个-LED lights flash program from left to right by the LED8 ~ LED15 light of a second every second
1
- 实现数码管的段选位选定义并且还有实现数码管的流水从1-9-Select the segment to achieve digital control Choice of digital realization of the definition and there is running water from the 1-9
adda
- 信号转换,模拟数据采集以及数字信号转换为模拟信号,适用于单片机-the adda analog data acquisition and digital signal converted to analog signals, 8051
STC89C51interrupt
- STC89C51流水灯按键中断程序设计进程-STC89C51 water lights button to interrupt the program design process
LED
- 学习使用S3C9454的简单使程,在IAR-C上编译通过.-9454 routine
51watch-dog
- 通过51看门狗定时器的使用,了解看门狗定时器的功能-Through the use of the watchdog timer 51, the Watchdog Timer function
juzhenkey
- 矩阵键盘控制数码管,每个键盘对应一个数码管显示,适用于stc c51单片机-Matrix keyboard control digital tube, with each keyboard corresponding to the digital tube display, is suitable for on STC c51