资源列表
3des
- Linux下c语言实现DES和3DES算法(Linux under c language, DES and 3DES algorithm)
gpsr-ns-2.tar
- 在linux下的ns2网络协议编程源代码，gpsr算法协议(In Linux under the NS2 network protocol programming source code, GPSR algorithm Association)
hd44780.7z
- HD44780 lcd 驱动，可以直接放在kernel 源码目录下，不过要自己在makefile中添加编译(the driver for HD44780 under linux)
LINUX设备驱动程序第3版
- LINUX设备驱动程序,最新的linux驱动程序编写教程。(LINUX device driver, this is the newest version of LINUX device driver book.)
vd265
- Import data files as input parameters matlab program is running, Very convenient to use, Complete HMM-based speech recognition system.
sl_uboot.tar
- dm8168-uboot源码里面是1gddr的evm配置(dm8168-uboot evm&&dvr)
01_signal_test
- 其中的源地址和目的地址是指网卡的硬件地址（也叫MAC地址），长度是48位，是在网卡出厂时固化的。可在shell中使用ifconfig命令查看，“HWaddr 00:15:F2:14:9E:3F”部分就是硬件地址。协议字段有三种值，分别对应IP、ARP、RARP。帧尾是CRC校验码。(The source address and destination address refer to the hardware address of the network card (also known as
01_session_daemon_test
- 在网络通讯时，源主机的应用程序知道目的主机的IP地址和端口号，却不知道目的主机的硬件地址，而数据包首先是被网卡接收到再去处理上层协议的，如果接收到的数据包的硬件地址与本机不符，则直接丢弃。因此在通讯前必须获得目的主机的硬件地址。ARP协议就起到这个作用。源主机发出ARP请求，询问“IP地址是192.168.0.1的主机的硬件地址是多少”，并将这个请求广播到本地网段（以太网帧首部的硬件地址填FF:FF:FF:FF:FF:FF表示广播），目的主机接收到广播的ARP请求，发现其中的IP地址与本机相符，
hxvqp
- Six degrees of freedom to achieve inverse kinematics algorithm, PSS primary synchronization signal in the time domain simulation related, The true extent of the value of the intermediary measure, measure the true extent of the agency based on the val
opkg-618.tar
- 支持openwrt系统opkg-618，解决编译过程中的问题(Support openwrt system opkg-618, solve the problems in the compilation process)
XBone_1.tar
- Xbox one FAKE emulator. coded on x64 with SDL2 and gcc. under Arch. its a fake emulator. only shows 3 images and does some fake printf. images are disquised as rom or disk files.
linux-x86-allnoconfig.tar
- Linux kernel, compiled realy tiny config