资源列表
Linux_shell
- Linux脚本编写学习，很好的资料，shell学习-Linux scr ipting learning good information, shell learning
bootloader
- sunplus9202项目的bootload，用于启动ecos系统，也即是redhot公司开发的redboot，很好用。该项目已经实施了-sunplus9202 project bootload, used to start ecos systems, that is redhot developed redboot, very good use.
uboot-yizhi-zongjie
- 基于JZ2440写的uboot移植的总结，这几天一步一步探索出来的，参考资料是韦东山的《嵌入式linux开发完全手册》-it is about uboot remove to match mechine
r6aii-remote-control-code
- R6AII遥控器的遥控代码，如果你刷机不小心遥控变砖了，记得根目录放上这个-R6AII of the remote control code, if you are not careful Brush remote bricked, I remember putting the root directory
drivate
- 这是2410控制步进电机的驱动程序，仅供参考。-This is the driver it is trying to control a stepper motor
led
- 蜂鸣器驱动程序代码，OMPA，适合初学者示例演示-Buzzer driver code, OMPA, suitable for beginners example demonstrates
linux-gpio
- 嵌入式Linux设备驱动编程（包含中断）-Embedded Linux device driver programming (including interrupts)
STM32F407-led
- STM32 usar程序，改程序实现LED流水闪烁，和串口打印功能-STM32 usar program, change the program to achieve LED water flashes, and serial print function
RT5572_LinuxSTA_V2.6.0.0.tar
- usb Wifi驱动源码，支持ralink3070 3370 5370 5372等，支持wps，可支持应用于项目，也是学习linuxusb驱动网络驱动的好东西-usb Wifi driver source code, support ralink3070 3370 5370 5372, and support for wps, can be used to support the project, but also to learn linuxusb drive network drive is
usb
- linux kernel usb源码 usb.c-linux kernel usb usb.c source
ov5647_Sensor
- OV5647驱动源码，可用于OV5647摄像头调试使用-OV5647 driver source code, can be used for debugging OV5647 camera
CustomFirmwareArDrone
- Parrot.ARDRONE 2.6.7 linux内核源代码-souce code for parrot kernel