资源列表
TQ210-dnw.tar
- TQ210上可以使用的dnw驱动，添加了Makefile文件，可以自己在自己系统中编译后添加，避免了官方提供的只能在32位系统使用的问题。理论通用需要dnw的开发板，只需将C文件中的PID和UID修改成对应开发板。这里可以通过windows下查看驱动的属性来获取PID和UID-dnw can be used on the TQ210 drive, add the Makefile, you can add your own in your own system compiled to avoid
Perspective-transformation
- 对一副图片内的四边形进行透视变换，可以得到四边形的四个点坐标以及对应的转换矩阵H。-A four-point coordinate of the quadrilateral and the corresponding transformation matrix H can be obtained by perspective transformation of the quadrilaterals in a picture.
100ask_toolchain.bz2
- RT5350与arm-linux_gcc之间的交叉工具，而形成linux-2.6的无线路由器hame_a100固件，无线路由器hame_a100的CPU: RT5350 FLASH: 8M SPI FLASH SDRAM: 32M
s3c2410_ts
- S3C2410_TS电容触摸屏的LINUX内核程序驱动代码,单C文件,供参考,可用于全志方案直接使用-S3C2410_TS capacitive touch screen LINUX kernel driver code, a single C file, for reference, can be used directly for the full program of Chi
gt82x
- GT82X电容触摸屏的LINUX内核程序驱动代码,有编译后的O文件,可用于全志方案直接使用-GT82X capacitive touch screen LINUX kernel driver code, compiled O files can be used directly for the full program of Chi
sw-device
- sw-drvice的LINUX内核程序驱动代码,有编译后的O文件,可用于全志方案直接使用-sw-drvice the LINUX kernel driver code, compiled O files can be used directly for the full program of Chi
ser2net_ok.tar
- 双向通信.支持监听指定端口并转发数据.上传的是交叉编译OK最新的代码。-Two-way communication. Support to monitor the specified port and forward data. Upload the latest code is cross-compiled OK.
stm32
- STM32功能引擎驱动说明,介绍了STM32的驱动模板使用,以及STM32使用,驱动中对不同功能模块驱动进行说明-STM32 function engine driver descr iption, describes the use of STM32 driver templates, as well as the use of STM32, the driver of the different functional modules to explain
SSD2828
- RGB-MIPI SSD2828初始化程序-RGB-MIPI SSD2828 init source code
button_pwm
- 通过按键控制PWM占空比，包括驱动和测试程序-Control PWM duty cycle by key，include driver and test program
Linux_LCD
- linux LCD驱动编程及移植文档，里面详细介绍了相关的开发步奏等-linux LCD driver coding reference
ccf
- 深度学习的行人检测ccf网络结构，接口matlab接口。-Learning depth pedestrian detection ccf network structure, the interface matlab interface.