资源列表
TLC2543
- s3c2410ARM的TLC2543驱动程序 用它可以驱动TLC2543 进行数据转换-s3c2410ARM the TLC2543 driver which can drive the TLC2543 data conversion
v4l1
- arm9Linux下基于摄像头的物体移动检测程序,可以用在门禁上,当有人经过时,自动通过基于video4linux的摄像头拍摄照片,并进行签名-arm9Linux under camera-based object motion detection program can be used in access control on automatically when someone passes through the video4linux-based camera to take pictu
2intauart
- LPC2000 中断和串口程序，ARM开启两个中断源Eint1与Eint2，分别用一个按钮来控制。在没有中断的时候两个LED都缓慢闪烁，当任何一个中断被出发的时候，对应的LED会急促闪烁，逐渐回复正常。 此外，使用一个串口来发送当前状态，在无中断的时候发送正常状态报告，当有中断的时候，串口发送中断源。 -lpc2000 interrupt and uart proc，tow interrupt resorces and seperately control tow led2 and se
gethostbyname
- 1、了解struct hostent 结构 2、了解gethostbyname()的使用方法 3、调用gethostbyname()获取主机信息 -Understanding of the gethostbyname () function to use, familiar with one of the important data structures and programming to obtain the host name, address and other infor
usb_camera
- 一个在2440上测试通过的USB摄像头测试程序，直接交叉编译生成可执行文件就可以用了。-In 2440 a test on through the USB cameras test procedures, direct cross-compiling generation executable file can use it.
S3C2410
- 该源码是基于ARM9 S3C2410A的LCD移植程序，LCD选用的是Sharp LQ080V3DG01 ，源码主要对LCD进行设置、初始化、并对LINUX kernel内核进行配置-。-The source is based on the ARM9-based LCD transplant program in the S3C2410A LCD optional Sharp, LQ080V3DG01 main source for LCD setup, initialization, and
install_v10.91.2.3
- Linux下网卡驱动，可解决大多数linux网卡问题！-Under Linux network card drivers can solve most of the linux network card!
uboot_init
- s3c2410内存初始化程序，下载uboot钱先初始化ram-memery initial program before download uboot
isd4004
- isd4004 c驱动代码 包括播放 录制 停止 等各个函数 ；是初学者学习写驱动的好例子-isd4004 c driver code to play the recording to stop all functions is a good example for beginners to learn to write a driver
dm9000
- 使用NAPI接口的DM9000 linux驱动-NAPI interface DM9000 linux drive
tty
- Video-driver written on C language.
Fuse
- Fuse Introduction - FUSE temporary user fle system.