资源列表
busybox-1.15.3.tar
- this is a busybox -1.15.3.tar.gz-this is a busybox-1.15.3.tar.gz
spi_adda
- 实现FPGA读取AD转换的数据，AD芯片我采用的是ADS7844，采用的是SPI通信方式-achieve the function of read the data from the AD transform chip.the communciation method is SPI.i have tested the code ,and it can work.
Adafruit-Fingerprint-Sensor-
- Adafruit-Fingerprint-Sensor 指纹模块 arduino-Adafruit-Fingerprint-Sensor fingerprint module arduino
drivers_and_test
- 韦老师视频的驱动源码，很齐，帮助大家学习-s3c2440 driver
wpa_supplicant-2.3.tar
- wpa_supplicant-2.3.tar.gz 用于usb wifi的统一接口，经过测试ok-RLT8188EUS latest driver, has been tested OK
SRAM
- 文件中包含了在MDK及IAR两种开发工具下的SRAM读写访问驱动代码，已调试通过。-Contained in the file under the two development tools for MDK and IAR SRAM read and write access to the driver code has been through debugging.
zynq下pcie nvme硬盘接口实现
- zynq7035下pcie nvme硬盘接口实现，包括硬件设计软件设计，用于各种工程项目，放心使用（已工程验证）。
ov9650
- ov9650初始化代码，i2c接口。适合初次使用的人-OV9650 initialization code, i2c interface. Suitable for first use
OV9650_drivers_for_2440
- 此程序为2440开发板上面的ov9650的驱动程序，飞凌嵌入式提供-This program is above 2440 development board ov9650 driver provides embedded Feiling
0V9650-drive-application-source-code
- 编译器必须为 3.3.2 编译时候要加参数 1)加载模块：insmod s3c2440a_camif.ko (设备节点为：/dev/v4l/video0) 2)运行程序：./ov9650_init (通过iic初始化ov9650芯片,运行一次即可) 2)运行测试程序：./testcamera (加-h可查看参数说明) 注： 1)驱动模块中不含摄像头芯片的iic初始化，初始化部分位于ov9650_init中。 2)若文件系统不支持2.6下的insmod命令，请
TQ2440-drivers_and_tese
- 韦东山嵌入式视频12期的驱动源码，基于TQ2440-Wei Dongshan embedded video driver source 12 based on TQ2440
arm
- 一个关于arm linux的语音信号处理的毕业论文，详细的讲解了各方面的知识。-A thesis arm linux on voice signal processing, a detailed explanation of all aspects of knowledge.