资源列表
linux3.0.35内核代码
- 飞凌核心板，imx6dl处理器内核代码，针对核心板特别全的源码
100ask_toolchain.bz2
- RT5350与arm-linux_gcc之间的交叉工具，而形成linux-2.6的无线路由器hame_a100固件，无线路由器hame_a100的CPU: RT5350 FLASH: 8M SPI FLASH SDRAM: 32M
linux-s3c6440
- Linux下的机器基于s3c内核，有一个完整的驱动框架供参考-Linux under the machine based on s3c kernel, there is a complete drive framework for reference
Driver-design-courseware
- 研究生驱动程序上课课件，关于linux的驱动编程-Graduate driver class courseware, driven programming on linux
UCOS-V6.0-2410plane-Code
- 这是一款UCOS V6.0-2410试验台工程代码，是个很不错的代码工程，欢迎下载-This is a very good code for ucos of test plane engineer code. welcome to download,..
Linux-driver-program
- Linux设备驱动开发详解第四版 宋宝华-Linux device driver development Xiang Jie- Song Baohua
arm-gcc-3.4.4-gm8180.tar.bz2
- GM’s GM8180 MDC1 hardware environment is a highly efficient RISC-based platform for the purpose of verifying and evaluating AMBA-based designs in the early development stage. The complete set of MDC1 GM8180 platform consists of a main board (MB12
JRTPTester
- 基于开源流媒体库JRTP编写RTP接收和发送代码实现；UPD,TCP,RTP流媒体，c/c++网络编程源码-Based on the open source streaming media library JRTP prepared to receive and send code to achieve RTP, UPD, TCP, RTP streaming media, c/c++ network programming source code
system
- 构成一个Linux系统所需的bootlader（u-boot)、内核及busybox等程序被放在这 个目录下。 里面有原始的源码及补丁，这些补丁是对这些代码所做的全部修改的集合。可以按照书中步骤逐渐修改，也可以直接使用这些补丁。可以利用这个目录下的源码构造出一个最小的Linux系统。-Constitute a Linux system required bootlader (u- boot), the kernel and the busybox is placed on this
Linux123
- Linux设备驱动开发详解 设备驱动开发入门-Linux device driver development explain device driver development entry
opt
- ARM Cross Compiler (Tool chain) for LINUX
Linux-device-driver-development
- Linux设备驱动开发详解：基于最新的Linux 4.0内核-Linux device driver development