资源列表
STC51-BMP085
- // BMP085 IIC测试程序 // 使用单片机STC89C51 // 晶振：11.0592M // 显示：LCD1602 // 编译环境 Keil uVision2 // 参考宏晶网站24c04通信程序-//BMP085 IIC test procedure //chip STC89C51 //Crystal: 11.0592M //display: LCD1602 //Keil compiler environment uVision2 /
MIDlg
- 这是一个非常好的串口通信测试程序，对你会有很大帮助-This is a very good serial communications test program will be of great help to you
HOU_310_ADC_vido_RS232
- F310的完整代码，实现从模拟端口对视频信号采样，并将所采得的图像信息以RS232方式发送到上位机PC中，并在上位机实现图像的还原过程。-F310 complete code, realize from analog port for video signal sampling, and collected by the image information to RS232 mode is sent to the host computer PC, and PC realize image re
Sokkia
- 手持记录表(PC-E500)与全站仪通讯并采集数据-Handheld record form (PC-E500) and the total station communications and data collection
2.4AT
- 广州本田车的自动变速器代码表，主要用于AT的解码与通讯，符合OBD2协议要求-Guangzhou Honda cars automatic transmission code table, mainly for AT decoders and communication, comply with the requirements in the agreement OBD2
dads
- 89C51的无线收发程序，很好的程序呢，我试过了，还是我的作业呢。通俗易懂，希望对你有帮助。-89 C51 wireless transceiver program, very good program? I tried, or my homework. Easy to understand, the hope is helpful to you.
SPI
- SPI主机模块，适合10024芯片等SPI接口-SPI master module for 10,024 chips SPI interface
UART
- 用verilog编写的UART串口通信程序，经验证误码率为0，系统由ARM控制FPGA的串口进行通信；-Written in verilog UART serial communication procedures, proven error rate is 0, the system controlled by ARM FPGA serial communication
ARM_MESSAGE
- 这个程序通过给ARM开发板的串口发送AT指令，使GPRSM模块可以在开发板上发短信，改程序用来控制GPRS模块自动发短信
java-com
- 自己写的简单上位机软件， 实现对com1口的监听， uart， 界面不是很完善， 提醒要自己写的同学们： 界面中输入的是字符串， 要输出到串口， 必须转化成16进制， 否则底层的协议是不会通过的。-Write your own simple PC software to realize the com1 port monitor, uart, the interface is not perfect, remind students to write their
MyCom
- linux下串口驱动！ 不错，可以看一看！了解串口的驱动！-Serial Driver! Yes, look at! Understanding Serial Port Driver!