资源列表
jiaotongdeng
- 交通信号灯控制，可以调红绿黄灯时间，有紧急模式和夜间模式- Traffic lights control, you can adjust the red and yellow light time, emergency mode and night mode
NETCONN_UDP_LWIP
- 嵌入式ucos和lwip通过UDP通信，控制按键上传给上位机数据。-Embedded ucos and lwip through the UDP communication, control keys uploaded to the host computer data.
usart_frame
- usart 用dma传输数据，采样中断方式处理，溢出错误处理-DMA transmission data with USART, sampling interrupt handling, overflow error handling
4MotorRobot
- C51单片机控制四自由度机器人可循迹自主前进-C51 microcontroller to control the robot with four degrees of freedom can be self tracking forward
AdjBrl
- C51控制呼吸灯周期可调节并用数码管显示-C51 control of respiratory lamp cycle can be adjusted and digital display
AutoDoor
- C51自动关门开门程序，结合无线控制和GSM模块-C51 automatic door closing procedures, combined with wireless control and GSM module
stm32f4test_LCD
- stm32f4单片机裸机开发，其中的LCD的驱动及显示程序，包括串口和温湿度传感器。-Stm32f4 bare metal development, drive and display program the LCD, including the serial port and the temperature and humidity sensor.
DS1302
- 用的是DS1302模块， 在430上用1602显示,年月日星期小时分钟秒都有。 -DS1302 on 430 with 1602 display
DS18B20LCD
- 这是通过51单片机实现温度采集功能的源码，希望可以给大家带来帮助-This is to achieve the temperature acquisition source by 51 microcontroller, hope can give us some help
sd
- 这里需要用到2G的SD卡，SD卡插上后，会在串口中对数据进行读写,显示0-9-It should be used in 2G SD card after the SD card plugged in the serial read and write data, display 0-9
DA-AD
- 我们单片机去控制PCF8591T去实现DA功能。这个代码也要在示波器上才能观测到，DA输出一个正弦波。-We have to control the PCF8591T microcontroller to achieve DA function. This code can also be observed on the oscilloscope, DA output a sine wave.
timer
- 这个代码中，我们用用计数器0来作为一个信号捕捉的端口。当在P3.4端口采集到下降沿的时候，会在数码管上加1.（P1.0连接到P3.4)在程序代码中，我们给了P1.0端口，进行 一个赋值，让它电平交替变化。每变化一次，数码管的值就会加1。-In this code, we use counter 0 as a signal to capture the port. When the P3.4 port to capture the falling edge of time, will increa