资源列表
0802
- 腾翼0802显示屏 程序 已使用 完全移植并使用-Tengyi 0802 display program has been fully transplanted and used
51JZ
- 51单片机 经典矩阵键盘扩展 已使用 ok-51 MCU classic matrix keyboard expansion has been used ok
Temperature
- I2C通信，温度检测驱动程序，移植性很强-I2C communication, temperature test driver, portability strong
EXP1-DC
- 直流电机驱动程序，采用DRV8833驱动，并用霍尔传感器测量转速，测量精确。-Dc motor driver, driven by DRV8833 and hall sensor measurement speed, precise measurement.
LJ_SPI_AD9833_2
- ADI公司的DDS芯片AD9833驱动程序，可以产生较宽频率范围的正弦波，精度高-ADI company DDS chip AD9833 driver, can produce a wider frequency range of sine wave, high precision
2
- 将单片机的系统时钟设置成56M，用UART1、printf()，以19200的波特率，将第1题实现的时钟功能，上传至PC端。-2, the microcontroller system clock is set to 56M, with UART1, printf () to 19200 baud rate, the first question to achieve the clock function, upload to the PC side.
3
- 将单片机的系统时钟设置成56M，用UART1，将第1题实现的时钟功能，传给第二个单片机，实现双单片机同步时钟。-The microcontroller system clock is set to 56M, with UART1, the first question to achieve the clock function, passed to the second microcontroller to achieve dual-chip synchronous clock.
4
- 实现单路PWM功能，发出一个频率、占空比可调的方波信号。- To achieve a single PWM function, issue a frequency, duty cycle adjustable square wave signal.
6
- 实现单通道AD的测量功能，并用按键设置其两个阀值，当AD的值不在这两个阈值中间时，实现越限报警功能，报警值可调，并且用FLASH保存这两个报警值，使其失电不丢。FLASH保存参数-When the value of AD is not in the middle of these two thresholds, the alarm function can be realized. The alarm value can be adjusted, and the two alarm values
1
- 将单片机的系统时钟设置成56M，用TIM2或TIM3实现时钟功能，并可用按键调整时钟，实现按键的消抖功能。-The microcontroller system clock is set to 56M, with TIM2 or TIM3 clock function, and can be used to adjust the clock key to achieve the key to eliminate shaking function.
DSP2803x_examples_ccsv4-45
- TI官方的基于CCS4.4的54个示例，做试验用的，具有很好的参考价值-TI s official CCS4.4 based on the 54 examples, for testing purposes, with good reference value
F28035-AD
- TMS320F28035的AD校准，比较实用，具有很好的参考价值。-TMS320F28035 AD calibration, more practical, with good reference value.