资源列表
stm8l-Low-power-operating-mode
- 此代码为STM8l 低功耗运行的电流功耗测试代码 欢迎大家学习-This code is the STM8l low power consumption current power test code Welcome to learn
stm8l-Low-power-standby-mode
- 此代码为 stm8l 低功耗等待模式下电流功耗测试代码 欢迎大家学习-This code is stm8l low-power standby mode current power test code welcome to learn
IOaUART
- 利用单片机IO口模拟UART程序,系统用了一个定时器和一个外部中断,外部中断主要是用来检测串口起始位的到来。-IO mouth simulation UART program, microcontroller system with a timer and an external interrupt, external interrupt is mainly used to detect the arrival of the start bit serial port.
Stm8l-wait-mode-WFI
- 此代码为stm8l WFI等待模式下电流功耗测试代码欢迎大家学习-This code is stm8l WFI wait mode current power test code welcome to learn
stm8l-Waiting-mode---WFE
- 此代码为 stm8l WFE模式下电流功耗测试代码欢迎大家学习-This code is stm8l WFE mode current power test code welcome to learn
stm8L-HALT-Low-Power-Mode
- 此代码为stm8l Halt模式下电流功耗测试代码 欢迎大家学习 stm8l所有功耗模式下电流测试代码已经上传完毕，欢迎大家批评指正。-This code is stm8l Halt mode current power test code welcome to learn stm8l all power mode, the current test code has been uploaded is complete, welcome criticism.
STM32F407_IIC_AT24C1024
- STM32F407 IIC模拟驱动时钟SD2401-read and write SD2401
STM32F407_SD2401_IIC
- 通过模拟IIC的方式，读写时钟SD2401-read and write SD2401
STM32F407uart1_uart5
- STM32F407 串口1到串口5的初始化和接收发送程序-STM32F407 USART1 TO USART5 receive and send
SAEJ1939
- 基于9s12的CAN 开发SAEJ1939协议源程序-Based on 9s12 CAN SAEJ1939
crazepony-firmware-none-5.2-ble
- crazypony飞控源码，keil版适合飞控初学者开发实践，简单上手快。-Crazypony flight control source, keil development practices for flight control beginners, the load on the simple.
fly
- 自写飞控源码，采用keil开发环境能。适合初学者使用的四旋翼飞控。-Since the write flight control source code, can use keil development environment.Four rotor flight control is suitable for beginners to use.