资源列表
DS90UR910
- TI公司的DS90UR910Q芯片数据手册，非常强大的视频数据串并转换芯片。-The DS90UR910Q is an interface bridge chip that recovers data the FPD-Link II serial bit stream and converts into a Camera Serial Interface (CSI-2) format compatible with Mobile Industry Processor Inter
6050
- 这篇源码基于模拟MSP430F5438型号的6050程序直接通过串口打印相应的数据已经做完四元数解算-This source is based on the simulation of the MSP430F5438 model 6050 procedures directly through the serial print the corresponding data has been completed four yuan solution
MTK-icn6211
- 基于MTK平台的icn6211的驱动代码，有i2c和mipi两种设置方式。-Based on MTK platform icn6211 driver code, i2c and mipi two set mode.
LCD_Driver_Porting
- 高通平台lcd驱动开发笔记，包括lk和kernel的lcd时序参数配置。-Qualcomm platform LCD driver development notes, including lk and LCD timing parameters of the kernel configuration.
infrared-temperature-measurement
- 红外测温毕业设计,思路明晰，C代码全，有LCD显示-Infrered temperature measurement
KWP2000-documetation-
- KWP 2000文档介绍了KWP2000协议帧格式，时序等-KWP 2000 documentation
hextobin_6982
- 16进制文件转换为bin文件，具体操作以实际操作为准-hex file rebuild to bin
balance-car
- 用于控制小车平衡的，结合小车硬件的程序，欢迎大家下载。-Used to control the car balance, combined with the car hardware program, welcome to download.
balance-vehicle
- 另一个用于控制小车平衡，结合小车硬件的程序，欢迎大家下载。-The other for the control of car balance, combined with the car hardware program, welcome to download.
RL78G13_I2C
- 瑞萨rl78G13 的 I2C开发实例，包括相关的时序及时钟的设置-rl78G13 I2C design
DS18B20a1602
- 以51单片机作开发板，利用ds18b20传感器检测温度，在1602显示屏上显示温度。-By 51 MCU development board, using ds18b20 temperature sensor detection, temperature shown on the screen in 1602.
Flash2803x_API_usingCCS4.0v_Readme
- TI的DSP C280X系列关于FLASH操作的详细说明，包含FLASH的擦除、都写操作；可进行FLASH的程序烧录参考或者数据烧录参考。文件为pdf。-TI s DSP C280X series on the FLASH operation of the detailed instructions, including FLASH erase, are written to operate can be FLASH program programming reference or data