资源列表
car0911 release
- 蓝牙小车程序,带蔽障功能,跑啊跑,求一个BTclient APP(Bluetooth Car program, with barrier function, run, run, ask for a BTclient APP)
electric control TEST
- msp430 f5529同时输出4路相同的pwm用于驱动电调(usemsp430f5529 launch pad to output pwm signal driving ec)
ContikiPro
- contiki的stm32移植,基于神州III号开发板。(contiki transplant to stm32)
Tutorial2
- adder4bit scheme, full adder, half adder, and practice
2F
- testing testbench to device under test (dut)
Bayonet
- 我自己编写的一个f1系列的库,以封装寄存器为基础,还将很多需要查询手册的内容都封装了起来,相比官方库函数,最大化了性能,并且节省代码。(I wrote a series of F1 library, based on the package register, but also a lot of need to query the contents of the manual package, compared to the official library function, maximize
led
- 利用计数器设计延时函数,通过四个led灯的闪烁,可以直观观察延时时长,fpga器件cyclone iv LCMXO2-1200HC-4TG144CR1,在demo板上作简路图(Using the counter to design the delay function, through the flashing of four LED lights, we can observe the delay time directly, FPGA device cyclone IV LCMXO2-12
STM32F407+w5500
- 485/422接收到的数据通过串口传给mcu,然后通过spi发给w5500芯片最后可以通过以太网传走(485/422 received data through the serial port to mcu, and then sent to the w5500 spi chip, and finally can be passed through the Ethernet)
stm32+w5500+24c16+md5
- 通过w5500芯片建立socket链接,并且MD5算法加密,并用24c16在掉电时存储小量数据(Through the w5500 chip to establish socket link, and MD5 algorithm encryption, and 24c16 in the power down when the storage of small amounts of data)
数字电位器-X9C104
- 这是一份数字电位器X9C104的文档,该芯片由intersil公司出品,3线串行接口,99个电阻单元,5V电源供电。(This is a digital potentiometer X9C104 document, the chip produced by INTERSIL company, 3-wire serial interface, 99 resistor units, 5V power supply.)
基于STM32F103和W5500
- 基于STM32F103和W5500,将W5500作为服务器,PC上位机作为客户端,进行数据交互(Based on STM32F103 and W5500, the W5500 as a server, PC host computer as a client, the data exchange)
US100&sr06热卖超声波资料
- //TDC中断输出脚,此脚用要来内配己完成信息的中断提示 //中断引脚Pin8,INT可以有不同的中断源,在寄存器2的Bits29-31(EN_INT)以及寄存器6 //bit 21位中进行选择. //Reg 2 bit 29 = 1 ALU 已经准备好 //Reg 2 bit 30 = 1 被设置的脉冲个数全部被接收到 //Reg 2 bit 31 = 1 TDC 测量单元溢出 //Reg 6 bit 21 = 1 EEPROM 动作的结束 //如果需要两个或两个以上的中断源,可