资源列表
PWM
- C8051f340单片机开发学习基础，如何设置使单片机输出PWM波形(How to set the output PWM waveform of single chip microcomputer)
Ucos_V0.2.91
- ucosII V2.01官方例程，基于CCS6.0平台建立的工程文件，顺利编译OK。 能够在开发板上正常运行！(UcosII V2.01 official routines, based on the CCS6.0 platform to build the project file, compile OK smoothly. Can run normally on the development board!)
SourceCode17_SPI_DAC2_AB_OK
- 基于TMS320F28335芯片的SPI驱动程序，基于CCS6.0平台建立的工程文件，编译OK。测试OK。(Based on the TMS320F28335 chip SPI driver, based on the CCS6.0 platform to build the project file, compile OK. Test OK.)
SourceCode26_T_PWM_DeadBand_OK
- 基于TMS320F28335芯片开发的带deadband PWM例程，基于CCS6.0平台建立的工程文件，编译OK。测试OK。(Based on TMS320F28335 chip development with deadband PWM routines, based on the CCS6.0 platform to build the project file, compile OK. Test OK.)
MCU4
- 超级珍贵的单片机教程资料，基于stm32的开发资料(Super precious SCM tutorial information, based on the development of STM32 data)
界面切换
- qt 实现窗口切换按键触发后可以切换到一个界面。退出后回到主窗口(chieve window switching of QT)
红外无线测温
- 实现红外控制测量温度，可以非常简单实现无线遥控(Infrared control to measure temperature)
09-1串口通讯USART
- 串口的端口的定义。端口初始值的赋值，定义端口的输入输出口，通讯数据的传送了接收。(The value of the initial value of the port,Define the input and output of the port,The transmission of the communication data is received)
STM32F10x_StdPeriph_Lib_V3.5.0
- stm32F103固件库的各个源文件，可以很快的找到相关的头文件(Source file for the firmware library)
aml_uboot.tar
- amloigc目录里面,请驱动开发按照这个结构存放,同时在Makefile里面的位置决定启动的顺序(S905D is an advanced application processor designed for OTT/IP Set Top Box(STB) and high-end media box applications. It integrates a powerful CPU/GPU subsystem)
lzop安装
- 这是一个在android下进行gpio驱动开发的例子，在这个例子中分别从底层驱动代码到测试程序再到android上的JNI层，然后通过java代码调用APP Framework层的接口实现对开发板上led的控制(This is carried out under a gpio android-driven development example, in this case were driven from the bottom to the android code to the test pr
超前进位加法器
- 8*8超前进位加法器，Verilog初学教程(file name is adder.v adder 8*8 bit)