资源列表
uart_test
- 通过FPGA,实现串口传输数据,并且可以支持多种不同的波特率,用EP4CE22F17芯片实现。(Through the FPGA, serial transmission data, and can support a variety of baud rates, using EP4CE22F17 chip implementation.)
步进电机S曲线算法
- 实现步进电机S曲线的算法。可用C语言实现,算法用C实现,然后数据可以通过FPGA用DDS处理,输出任意频率和脉冲个数。(Algorithm for realizing S curve of stepping motor. C language can be implemented, the algorithm is implemented with C, and then data can be processed by FPGA using DDS, output arbitrary freq
exFAT文件系统移植
- 基于linux3.2.0 嵌入式ARM,移植exFAT文件系统,增加文件系统对大容量存储设备的支持(Based on linux3.2.0 embedded ARM, transplant exFAT file system, increase file system support for large capacity storage device)
实验六 LCD1602液晶显示实验
- 51单片机模块程序开发学习,其中液晶显示屏学习(51 microcontroller module program development and learning, including LCD screen learning.)
BSXlite_Cortex_M3_M4_M4F
- BSXlite arm cortex demo
stm32f0discovery_fw
- stm32f0discovery firmware
dma+串口接收
- 无需中断产生,直接使用DMA接收串口的数据,直接下载下来,编译即可,(No need to interrupt, directly use the DMA to receive data from the serial port, download directly, compile it)
Buzzer
- 采用verilo语言编写的蜂鸣器,可用ISE软件来试实现(Buzzer written in verilo language, available ISE software to try to achieve)
实验九 DS18B20温度传感器实验
- 51单片机模块程序开发学习,其中数字温度传感器学习(51 microcontroller module program development and learning, in which digital temperature sensor learning)
LED2
- 基礎code for shinning LED by using 8051(fundamental code for shinning LED by using 8051)
contral drive
- IAQ控制驱动程序,可以驱动IAQ,获取IAQ数据。(IAQ drive,use to get information from IAQ.)
ADC
- zigBee CC2530模块的ADC模块编程,使用串口0进行数据传输(ZigBee CC2530 module ADC module programming, using serial port 0 for data transmission)