资源列表
stm32f103rtc
- 使用内部LSI校准后作为RTC时钟源，亲测有效，LSI连接到TIM5校准(Using the internal LSI calibration as the RTC clock source, the pro test is valid, and the LSI is connected to the TIM5 calibration)
3.SDRAM读写
- STM32F4处理器 SDRAM完整读写历程，(STM32 SDRAM read and write)
stm32746g_sdram
- stm32f746的SDRAM驱动，hal库文件编写(Stm32f746's SDRAM driver, Hal library file writing)
CCS5.5的详细操作说明
- CCS5.5使用操作说明，入门指南，适用于新手(CCS5.5 use operation instructions)
instaspin_project&labs-userguide
- TI FOC控制 instaSPIN详细说明文档(TI FOC controls instaSPIN detailed documentation)
STM32F103C8T6-IMU-6050
- stm32f103硬件IIC读取MOU6050驱动代码，带DMP程序(STM32F103 hardware IIC reads the MOU6050 driver code, with the DMP program)
protel99格式 单片机交通灯
- 交通灯PCB原理图，包含如何设计，PCB图的转换(Traffic light PCB schematic diagram)
DWG_Smart-Card_USB-ICC_ICCD_rev10
- smart card specification
5.44业务配置
- 是一种常用的router acl配置，就是一种常用的router acl配置(It's a common router ACL configuration, a common router ACL configuration)
stc89c52红外遥控LED变动
- 在lcd1602能显示按键编码，通过按快进和后退能够使led流水式变化
STM32定时器中断程序
- 本源代码为讲解基于STM32的定时器中断程序，通过定时器TIM3产生间隔1秒钟一次的中断，在中断中控制LED发光二极管，每次中断都使发光二极管状态取反(This source code is explained based on the STM32 timer interrupt program, through the timer TIM3 interrupt an interval of 1 second, in the interrupt control LED light-emittin
STM32外部中断程序
- 本源代码为基于STM32的外部中断程序，需要关注的点是相应端口时钟配置、管脚初始化配置和中断配置(The source code is an external interrupt program based on STM32, and the point to focus on is the corresponding port clock configuration, pin initialization configuration, and interrupt configuration.)