资源列表
程序
- 智能控制LED灯的亮灭，和强度。可用于家庭或者楼道(Intelligent control LED lights, and intensity. Can be used in a family or a corridor)
led_test
- 流水灯例程，是FPGA的入手级程序，初步了解FPGA的时序(The water lamp routine is the start procedure of FPGA, and initially understands the timing of FPGA.)
ws2812
- ws2812呼吸灯驱动 通过控制IO电平和延迟模拟时序，改变亮度达到呼吸效果(Ws2812 breathing lamp drive By controlling IO level and delay simulation timing, we can change brightness to achieve breathing effect.)
pmd
- 使用串口烧给芯片，可以得到跑马灯的结果，时间周期为1s。(The use of serial burn to the chip, can get the marquee results, the time period of 1s.)
OLED
- 一个较好用的OLED显示代码，iic通信，淘宝店家给的(Better use of the OLED display code, given by the Taobao store)
at7_ex01
- 8个LED执行流水灯。流水灯依次循环点亮。基于vivado平台编写的Verilog代码(The 8 LED executes the flow light. The flow light is turned on and out in turn. Verilog code based on vivado platform)
at7_ex03
- 使用FPGA内部的PLL产生时钟，计数器循环计数驱动LED闪烁。基于vivado平台编写的Verilog代码(Use FPGA's internal PLL to generate clock, counter cycle counting drive LED flicker. Verilog code based on vivado platform)
at7_ex04
- 通过LED闪烁控制器的代码，使用Vivado工具配置定义一个IP核，在用户工程中可随意添加这个IP核作为设计的一部分，如同Vivado自带的IP核一样方便调用和集成。(Through the code of the LED scintillation controller, the Vivado tool is configured to define a IP core, and the IP kernel can be added as part of the design at rando
at7_ex05
- 实现PC端通过UART发送数据到FPGA，FPGA将所接收到的数据同样是通过UART原本不动的发回给PC端。(The PC terminal sends data to FPGA through UART. FPGA sends the received data back to the PC end by UART.)
dengju
- 灯具控制器的接受部分与发送部分，实现控制灯具的功能(The receiving part and sending part of lamps and lanterns controller realize the function of controlling lamps and lanterns.)
DLL_clock_generator
- DLL is useful for the ug and pg sdents tu
electric_MIPS
- Embedded C prgaming can be practiced