资源列表
基于AlteraFPGA的DpramIPcore设计
- 基于altera fpga的dpram ipcore 设计，包含整个工程和modelsim仿真文件。读写地址及读写使能是通过数据产生模块来产生。
IMX28REFSCH.zip
- I.mx283 Demo 板参考原理图，cadence格式。
28335的基本AD转换代码
- 28335的基本AD转换代码，开发板提供的例程，已经编译通过。
DCAC_three_2017G
- dsp编程，基于dsp的双闭环电流转速环的直流电机调速系统设计(DSP programming,Design of DC motor speed regulating system with double closed loop current speed loop based on DSP.)
SN8P2711B_AD_PRO
- MCU：SONIX SN8P2711B 功能：采样并使用串口发出采样值，波特率9600 开发语言：汇编程序
ADS1256
- ads1256驱动代码，用verilog编写,在quartus上运行成功(ADS1256 driver code, written in Verilog, runs successfully on quartus.)
四合一传感器-V1.0-改
- M0+ NXP824控制LORA芯片，ZM470SX和SHT31,MAX44009(M0+ NXP824 control LORA chip,ZM470SX AND SHT31,MAX44009)
down_up_dds
- 在Vivado下完成AD输入到下变频的功能，频率可配置，通用化设计。(The function of AD input to down conversion is completed under Vivado, and the frequency is configurable and universal design.)
土壤湿度传感器程序
- 一个很详细的教程，能够实现土壤湿度的一个检测，通过arduino,并且有实际的教程，包括原理的说明和连线。(A very detailed tutorial that enables a test of soil moisture, through Arduino, and has practical tutorials, including a descr iption of the principles and wiring.)
FFT
- 一个使用DSP28335的FFT经典例子，在南京某开发板上实现。(A classic FFT example using the DSP28335 is implemented on a development board in Nanjing.)
PIC32MM.X
- 实现SX1280的收发程序，模式可以自行设定，FLRC实测速率可以达到1Mbps(Achieve the SX1280 transceiver program, the mode can be set by itself, the measured speed of FLRC can reach 1Mbps)
STM32(普通IO 模拟串口)
- 利用STm32普通IO口实现串口功能，可以弥补串口不足的缺点(Using STm32 common IO port to realize serial port function)