资源列表
3128
- cpld3128开发板的原理图 很有用,已经做成PCB,需要的话可以联系我-cpld3128 development board diagram useful to have caused PCB, the need to be contacted I
ertfs
- ertfs文件系统里面既有完整ucos程序，又有原理图及原版fata32-ertfs file system integrity both inside TRACK procedures, with original drawings and fata32
cm30
- OLED显示小程序，用于在OLED上显示设定的图象或者文字！-small OLED displays procedures for the OLED display settings on the image or text!
signallight
- 基于atmega128的交通信号灯控制程序-atmega128 based on the traffic signal control procedures
SZ048
- 利用软件编写的I2C传输界面程序,适用于现有4位机等汇编语言中!-use the software prepared by the Transmission I2C interface procedures applicable to the existing four aircraft assembly language!
I2c_51
- I2C控制程序,供大家学习参考,使用时根据自己的系统修改.-I2C control procedures for all study reference, when used according to its own system changes.
DE2_SD_Card_Audio
- This designs uses a Nios II system to demonstrate how to read from the SD card. The software reads WAV files from the SD card and plays it through the LINE OUT line. Simply put a SD card into the slot on the board and connect some speakers to the LIN
DE2_Default
- his design is the initial design when the board is powered-up. It increments a counter and displays the value on the 7-segment displays and LEDs. An image is also displayed on the VGA port.-his design is the initial design when the bo ard is powere
FOXserialportover9
- 用于多于9个串口的ce驱动程序。时间仓促。可以参考-for more than nine serial port ce driver. Time constraints. Reference
ADTdriver
- ADT700的小程序，开发的代码，可以参考一下。-ADT700 small procedures, the development of the code can be examined.
zml
- 嵌入式的小程序，可以参照一下。比较简单。-Embedded small procedures, can refer to this. Relatively simple.
jiyuCPLDdeHDB3bianmaqi
- 基于cpld的hdb3编码器 基于cpld的hdb3编码器-hdb3 coding is based on the cpld hdb3 cpld coding is based on the h db3 Encoder